What oil does a Ford Figo 1.4 take?

The Ford Figo 1.4 typically uses 5W-30 engine oil (full synthetic) as the default specification, though exact viscosity can vary by model year and market. Always verify with your owner's manual or Ford’s official service resources for your vehicle’s VIN.

Oil grade and viscosity for the Figo 1.4

Guidance on the oil viscosity you might encounter across different Figo 1.4 versions and climates.

• Most Figo 1.4 engines default to 5W-30 full-synthetic engine oil for standard driving conditions.


• In very hot climates or under high-load driving, some manuals permit 5W-40 full-synthetic oil.


• In certain markets with stricter fuel-economy targets, 5W-20 synthetic (or semi-synthetic) may be approved; always verify with the manual for your VIN.

Note: The exact grade and whether synthetic or semi-synthetic is allowed depend on your model year and market. The best practice is to follow the manual or the official Ford service portal for your VIN.

Oil standards to look for when buying

When shopping for oil, check that it meets the relevant quality standards and your Ford-specific requirements:

• Viscosity options: 5W-30 is the standard default for many 1.4 Figos; 5W-40 or 5W-20 may be specified in some cases depending on climate and model year.


• Quality and performance standards: choose oil that meets API SN or newer and ILSAC GF-6 or newer where available.


• OEM specification: oils that explicitly state Ford approval or meet Ford's recommended specification for your engine are preferred. If your manual references a Ford-specific spec, make sure the oil bottle shows that approval.

If you're unsure, ask a Ford dealer or a trusted service center to confirm the correct grade and specification for your exact vehicle VIN.

Maintenance tips and changing intervals

To keep the Figo 1.4 engine in good running condition, follow the manufacturer’s recommended oil change intervals and use high-quality oil:

1. Consult the owner's manual or Ford’s official service portal for your exact VIN to get the recommended viscosity and change interval.


2. Use an API SN or newer, and ILSAC GF-6 or newer certified oil that matches the grade specified for your climate.


3. Always ensure the correct oil quantity and preferably use a suitable oil filter when changing the oil.


4. If you’re unsure about performing the change yourself, have a professional technician carry out the service to ensure proper drainage and filter installation.

Adhering to the recommended maintenance schedule helps protect the engine, maintain efficiency, and maximize the vehicle’s lifespan.

Summary

The Ford Figo 1.4 commonly uses 5W-30 full-synthetic engine oil as the default grade, with some markets allowing 5W-40 or 5W-20 depending on climate and model year. Always confirm the exact specification from your owner's manual or Ford’s service resources for your VIN, and choose an oil that meets API SN or newer and ILSAC GF-6 or newer. When in doubt, consult a dealer or qualified mechanic for guidance.

How much oil for a 1.4 L engine?

4 litres (with filter). After refill check oil level.

Can you use 5W-30 instead of 5W-20 in a Ford Focus?

Yes, you can likely use 5W-30 instead of 5W-20, but you should always check your owner's manual or the oil cap first to confirm the correct viscosity for your specific Ford Focus model and engine, as some models (especially turbo or high-performance variants) specifically require 5W-30, while others like the 1.0L or certain base models recommend 5W-20. Using a slightly thicker 5W-30 oil may slightly reduce fuel efficiency but should still provide adequate lubrication and protection, while using 5W-20 will maximize fuel economy.
 
Considerations when switching

• Check your manual: This is the most important step to avoid potential issues like reduced fuel economy or incorrect lubrication for your specific engine. 
• Engine protection: A thicker oil like 5W-30 offers a thicker film at operating temperature, which some argue provides better protection, especially in very hot climates. 
• Fuel efficiency: A thinner oil like 5W-20 is designed to reduce internal friction and maximize fuel economy, which is why it's often recommended by manufacturers. 
• Engine performance: While 5W-30 should not damage your engine, some drivers have reported that thicker oil can cause cold-start rattle in certain engines or a minor reduction in performance. 
• Other factors: The presence of a turbocharger, the age and mileage of your engine, and your local climate can all influence which oil is best suited for your vehicle. 

In summary
While 5W-30 is likely a safe option for many Ford Focus models, it's always best to confirm your vehicle's specific requirements in the owner's manual or on the oil cap before making the switch. If your manual specifies 5W-20, using 5W-30 will likely cause a slight decrease in fuel economy.

Can I use 5W-30 in a Ford Fiesta?

Fully synthetic 5W-30 is considered the gold standard in oil for Ford engines. If you want to protect your engine and help it stay running at its best for longer, always invest in high-quality synthetic engine oil that offers maximum protection and durability.

What oil does a 1.4 Ford Fiesta take?

4 LITRES FULLY-SYNTHETIC ENGINE OIL 5W30 913D FORD SPEC. OIL FILTER, AIR FILTER, FUEL FILTER.