What oil goes in a 2008 Dodge Avenger 2.4 L?
The recommended oil for a 2008 Dodge Avenger with a 2.4L engine is 5W-20 synthetic motor oil. This oil grade provides the optimal balance of fuel efficiency, engine protection, and performance for this vehicle model and engine size.
Detailed Explanation
The 2008 Dodge Avenger is equipped with a 2.4-liter inline four-cylinder engine. Dodge recommends using a 5W-20 synthetic motor oil for this engine. The 5W-20 oil weight provides the right viscosity for proper lubrication and engine protection in a wide range of temperatures, from cold winter starts to hot summer conditions.
Synthetic oils are preferred for modern engines like the 2.4L in the 2008 Avenger because they provide superior performance and protection compared to conventional mineral-based oils. Synthetic oils maintain their viscosity better, resist breakdown, and offer improved fuel efficiency.
Oil Change Interval
Dodge recommends changing the oil and filter in a 2008 Avenger 2.4L every 5,000 to 7,500 miles, or every 6 to 12 months, whichever comes first. Following the manufacturer's recommended oil change interval is important to ensure the engine receives proper lubrication and protection.
Oil Capacity
The oil capacity for a 2008 Dodge Avenger 2.4L engine is 4 quarts. When changing the oil, be sure to use the correct amount to avoid overfilling or underfilling the engine.
Tips for Choosing the Right Oil
- Always refer to the owner's manual for the manufacturer's recommended oil type and viscosity.
- Look for oils that meet the API (American Petroleum Institute) service rating required for your vehicle, which is typically SN or SP for a 2008 Avenger.
- Consider using a high-quality synthetic oil to maximize engine protection and performance.
- Avoid mixing different oil types or brands, as this can affect the oil's performance.
By following the manufacturer's recommendations and using the right 5W-20 synthetic motor oil, you can help ensure your 2008 Dodge Avenger 2.4L engine runs smoothly and efficiently for years to come.
How much oil does a 2.4 L Dodge Avenger take?
The oil capacity for a Dodge Avenger with the 2.4L engine is 4.5 US quarts (approximately 4.3 liters) when replacing the oil and filter. It is crucial to always check the oil level with the dipstick after refilling to ensure it is within the correct range.
- Capacity: 4.5 US quarts with a filter change.
- After refilling: Always check the oil level with the dipstick to confirm the proper fill.
- Oil type: The recommended oil is typically a 5W-20 viscosity, though some sources may suggest 5W-30 as an alternative.
What kind of oil do you put in a Dodge Avenger?
The recommended oil for a Dodge Avenger is typically 5W-20, especially for the 4-cylinder engine. Some models, like the 2010, might also use 5W-30. It is best to consult your owner's manual to confirm the specific type and weight, and always use an oil that meets the API SN or higher standards and is compatible with your engine, such as a full synthetic or synthetic blend.
Key details
- Viscosity: 5W-20 is commonly specified, but check your owner's manual, as some models may use 5W-30.
- Oil type: Full synthetic or a synthetic blend is recommended for best performance and protection, especially for high-mileage engines.
- Specifications: Look for oil that meets or exceeds API SN or higher standards, and specifically meets the Chrysler MS-6395 requirement.
- Oil filter: Always replace the oil filter with each oil change.
- Capacity: The 2.4L engine typically takes 4.5 quarts of oil with a filter change.
What kind of oil does a 2008 Dodge Avenger 2.4 L take?
5W-20
Notes: Full synthetic Dexos. 5W-20.
What kind of oil does a Dodge 2.4 take?
Oil Grade: SEO11
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter). After refill check oil level. |
| Torque: | 20 ft/lbs (Oil Drain Plug) |
