How do you reset the TPMS sensor on a Acura RDX?
To reset the Tire Pressure Monitoring System (TPMS) sensor on an Acura RDX, you'll need to follow a few simple steps. The TPMS sensor monitors the air pressure in your vehicle's tires and alerts you when the pressure drops below a certain level. Resetting the sensor is necessary after changing a tire, rotating the tires, or when the TPMS warning light is illuminated on your dashboard.
Steps to Reset the TPMS Sensor on an Acura RDX
- Park your Acura RDX on a level surface and turn off the engine.
- Locate the TPMS reset button, which is usually found near the steering wheel or in the driver's side footwell. Refer to your owner's manual if you're unsure of the exact location.
- Press and hold the TPMS reset button for 3-5 seconds until the TPMS warning light on the dashboard starts flashing. >
- Drive your Acura RDX for at least 20 minutes at speeds above 20 mph. This allows the TPMS sensors to recalibrate and the warning light to turn off.
- If the TPMS warning light remains on after driving, repeat the reset process or consult your Acura dealer for further assistance.
Resetting the TPMS sensor on your Acura RDX is a straightforward process that can be done in a matter of minutes. By following these steps, you can ensure your TPMS system is functioning correctly and avoid any potential safety issues related to underinflated tires.
