What oil should I use in a Subaru Legacy?
When it comes to maintaining your Subaru Legacy, one of the most important factors is selecting the right engine oil. The oil you use can have a significant impact on your vehicle's performance, fuel efficiency, and overall longevity. In this article, we'll provide a detailed guide on the best oil to use for your Subaru Legacy.
Recommended Oil Specifications for Subaru Legacy
According to the Subaru owner's manual, the recommended oil for the Subaru Legacy is a 5W-30 synthetic oil. This oil grade is designed to provide optimal lubrication and protection for the engine, even in a wide range of temperatures. The 5W-30 specification indicates that the oil has a low viscosity at cold temperatures (5W) and a medium viscosity at high temperatures (30).
It's important to note that Subaru also recommends using Subaru Genuine Motor Oil or an equivalent oil that meets the Subaru oil specifications. These oils are formulated to meet the specific requirements of Subaru engines, ensuring optimal performance and protection.
Benefits of Using the Recommended Oil
Using the recommended 5W-30 synthetic oil in your Subaru Legacy provides several benefits:
- Improved Fuel Efficiency: The low-viscosity 5W-30 oil helps reduce engine drag, resulting in better fuel economy for your vehicle.
- Enhanced Engine Protection: The synthetic formulation of the oil provides superior lubrication and wear protection, helping to extend the life of your engine.
- Easier Cold-Weather Starting: The 5W-30 oil flows more easily in cold temperatures, making it easier for your engine to start up in colder climates.
- Reduced Oil Consumption: Synthetic oils tend to have a lower rate of evaporation, which can help reduce the amount of oil your Subaru Legacy consumes over time.
By using the recommended 5W-30 synthetic oil, you can help ensure that your Subaru Legacy runs smoothly and efficiently for years to come.
Conclusion
Choosing the right engine oil is crucial for the health and performance of your Subaru Legacy. The recommended 5W-30 synthetic oil, or an equivalent oil that meets Subaru's specifications, is the best choice for your vehicle. By following the manufacturer's recommendations, you can enjoy the benefits of improved fuel efficiency, enhanced engine protection, and a longer-lasting vehicle.
Can you put 5W-30 in a Subaru?
The recommended Subaru Forester oil is best served by a 5W-30 synthetic motor oil, and thankfully, Subaru offers this as an OEM part that's got the Subaru blessing right on it. Want to learn more about the Subaru Forester oil change?
What oil is best for a Subaru Legacy?
Subaru recommends that you use 5W-30 oil. This is what should be used for the best flow possible and the best protection. You can use either synthetic or conventional. If you typically drive in temperatures near or above 100 degrees you can use 10W-30. I hope this answers your question.
How often does a Subaru Legacy need an oil change?
every 6,000 miles
Engine oil should be changed every 6,000 miles when you drive your Subaru frequently since the oil eventually wears and becomes less effective due to heat and friction caused during engine operation .
Is it OK if I put 5w20 instead of 0w20?
If SAE 0W-20 synthetic oil is not available, SAE 5W-20 conventional oil may be used. However, it must be replaced with SAE 0W-20 synthetic oil at the next oil change.
Can I use 5W-30 instead of 0W-20?
Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle's engine. Thus, always refer to the manufacturer's recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
What oil does a 2015 Subaru Legacy 4 cylinder take?
Oil Grade: SM
| Viscosity: | 0W-20 (All TEMPS) |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What kind of oil does a Subaru 2.5 take?
Synthetic oil-specifically 0W-20-is highly recommended for optimal engine performance and protection. If synthetic oil isn't available at the time of an oil change, 5W-30 conventional oil may be used instead.
How much oil does a Subaru Legacy 2.5 L take?
4.4 quarts
Oil Grade: SN
| Viscosity: | 0W-20 (All TEMPS) - If 0W-20 synthetic oil is not available,5W-30 conventional oil may be used if replenishment is needed but should be changed to 0W-20 synthetic oil at the next oil change. |
|---|---|
| Capacity: | 4.4 quarts (with filter). After refill check oil level. |
What engine oil does Subaru recommend?
Most new Subaru vehicles require synthetic oil with a viscosity rating of 0W-20.
What kind of oil does a 2014 Subaru Legacy take?
5W-30 synthetic motor oil
5W-30 synthetic motor oil is required for 2011 and newer turbo-charged Subaru vehicles.
