What size are Ford Ranger wheel nuts?
Most late-model Ford Rangers use lug nuts sized M14 x 1.5 with a 21 mm hex, 60-degree conical seat, on a 5-lug setup. This is typical for 2019–present models in many markets, but variations exist by year and region. Always confirm for your exact vehicle.
Common lug nut specs for recent Ford Ranger models
The following specifications cover the regular factory-installed lug nuts on most Rangers built around 2019 and later. If your wheels or aftermarket parts differ, sizes may vary.
- Thread size: M14 x 1.5 (most 2019–present Rangers)
- Nut seat type: 60-degree conical (tapered) seat
- Nut hex size: 21 mm (some wheels and aftermarket lug nuts may use 19 mm)
- Lug count: 5 lug pattern on standard Rangers
Note: Always verify with the exact vehicle documentation since some regional variants or older generations may deviate.
How to confirm the exact lug nut size for your Ranger
Use these steps to confirm the size for your specific vehicle and wheel setup.
- Check the owner's manual or the door jamb/driver's-side placard for wheel lug nut specs and torque.
- Inspect the lug nuts currently on the vehicle; read any stamped numbers on the nut (e.g., M14 x 1.5) and measure the hex size with a caliper or ruler.
- If you are replacing wheels or installing aftermarket rims, verify the wheel's contact surface and seat type to ensure compatibility with the lug nuts.
- Consult a dealer or service bulletin for your VIN if unsure, especially for special editions or regional variants.
These steps help ensure you use the correct hardware and maintain safety and performance.
Summary
For most modern Ford Rangers (around 2019 onward), lug nuts are M14 x 1.5 with a 21 mm hex and a 60-degree conical seat, on a 5-lug system. Always verify your exact model year and wheel configuration through official sources or measurement to avoid incorrect parts.
Is 1/2 or 3/8 better for lug nuts?
Is 1/2 or 3/8 better for lug nuts? A 1/2-inch drive is better for lug nuts because it covers the torque range most vehicles require and allows you to tighten them with confidence.
What size are Ford wheel nuts?
Most modern Ford vehicles use M14x1.5 lug nuts, while some older models and certain trucks use M12x1.25 or M14x2.0. The most common size for a F-150 from around 2015 onwards is M14x1.5, and for F-250s it is M14x1.5. For older F-150s (2004-2014), the size is M14x2.0, and many other models like the Escape, Focus, and Fusion use M12x1.25. Always check your owner's manual for the specific size for your vehicle.
| Lug Nut Size | Common Vehicles |
|---|---|
| M14x1.5 | Most 2015+ F-150s, F-250s, Explorers, and Mavericks |
| M14x2.0 | 2004-2014 F-150s, 2003-2014 Expeditions, 2003-2014 Navigators |
| M12x1.25 | 2001-2022 Escape, 2012-2018 Focus, 2006-2020 Fusion, 2011-2022 Fiesta, 2019-2026 Ranger (including Raptor), 2021-2026 Bronco (non-Raptor) |
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_eM0labHzO6Kzi-gPn8u1oA8_359';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();
What size lug nuts are on a Ford Ranger?
24 Lug Nuts 12x1. 5 Black Replacement Lugs fits 6 Lug Ford Ranger OE Wheels.
What size socket for Ford Ranger wheel nuts?
19mm socket
What Size Socket Are Ford Ranger Wheel Nuts? To remove or install Ford Ranger wheel nuts, you'll need a socket that matches the nut size. The most common Ford Ranger wheel nut socket sizes are: 19mm socket for 12mm nuts.
