What size are stock 3rd gen 4Runner wheels?
The short answer: 16x7 inches, with a 6x139.7 mm bolt pattern, typically paired with 265/75R16 tires.
The 1996–2002 3rd-generation Toyota 4Runner was designed around a practical, durable wheel-and-tender setup that favored off-road capability while preserving on-road comfort. The factory wheels and tires were chosen to fit within the stock suspension and fender geometry, providing reliable performance across a variety of terrains.
Wheel size specifications
Below is a concise breakdown of the key measurements that define the stock wheels and tires for 3rd-gen 4Runners. Use this as a reference when shopping for replacements or upgrades.
- Wheel diameter: 16 inches
- Wheel width: 7 inches
- Bolt pattern: 6x139.7 mm (6 on 5.5 inches)
- Stock tire size: 265/75R16
These specifications cover most 3rd-gen models across typical trims, including SR5 and Limited, though there can be year-to-year or option-package variations. Always verify your exact vehicle’s wheel stamps or owner’s manual for precise figures before purchasing replacements.
Upgrade considerations
If you’re exploring aftermarket wheels or larger tires, keep a few practical points in mind. Ensure any new wheels retain the same 6x139.7 mm bolt pattern, and pay attention to offset and backspacing to maintain proper clearance and steering geometry. Lifts or fender modifications can affect fitment, so consult a professional and reference your vehicle’s specifications when planning wheels or tire changes. Matching the intended tire width with the wheel width is also important to avoid rubbing or contact with suspension components.
Summary
In summary, the stock wheels on a 3rd-generation Toyota 4Runner are 16x7 inches with a 6x139.7 mm bolt pattern, paired with 265/75R16 tires. This configuration provides a balanced baseline for both daily driving and off-road use, and it serves as a reliable starting point for any upgrades or replacements.
