What size are the axle nuts on a 2015 Ford Explorer Sport?
The axle nuts on a 2015 Ford Explorer Sport typically measure 22 millimeters (mm) in size. This is the standard size used for the rear axle nuts on this model of Ford SUV.
Detailed Explanation
The 2015 Ford Explorer Sport is a mid-size SUV that was part of the fifth generation of the Explorer lineup. Like other Ford vehicles, the Explorer Sport uses specific hardware and fasteners, including the axle nuts that secure the rear wheels to the axle shafts.
According to the information gathered from various automotive resources, the rear axle nuts on a 2015 Ford Explorer Sport measure 22 mm in size. This is a common size used across many Ford models and is necessary to properly tighten and secure the rear wheels to the vehicle.
Importance of Proper Axle Nut Size
Ensuring the correct axle nut size is critical for the safe operation of a vehicle. If the nuts are too small, they may not provide enough clamping force to keep the wheel securely attached. Conversely, if the nuts are too large, they may not thread properly onto the axle, leading to potential wheel separation and a dangerous situation.
Using the proper 22 mm axle nuts on a 2015 Ford Explorer Sport helps maintain the structural integrity of the rear suspension and ensures the wheels remain firmly in place during driving. This is an important safety consideration that should not be overlooked when performing maintenance or repairs on this vehicle.
Are all Ford wheel nuts the same size?
depends if youre on original ford alloys or after market alloys. thread size is the same regardless , but the width of the tapered conical washer is different. ford wheels need a i wider nut , like these....... aftermarket wheels need a narrow nut due to smaller bolt recess , like these....
What size is the CV axle nut on a 2015 Ford Escape?
It's 32mm!
Just for anyone else who decides to do this job, it's fairly easy, the axle nut size is 32mm and to remove the bolts that hold the hub on, a 10mm spline socket is what I had to use.
What size is the axle nut?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
What size are the wheel nuts on a 2015 Ford Explorer?
1/2" thread size, 3/4" and 13/16" hex. 20-pack, 1/2 spline acorn lug nut.
What size are axle lug nuts?
More than likely if it's a newer one newer axle or if you buy it from Trailer Parts Unlimited. It's going to be 9 16s. And then you have your 5 8 cone nut you'll see these on 8ks 10ks and 12ks.
What size socket do I need to remove an axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size are the wheel nuts on a 2016 Ford Edge?
Wheel Nut M14-1.50 Metric – 21mm Hex, 38.5mm Length.
What size is the hub nut on a 2013 Ford Explorer?
M22 x 1.5mm
Notes: Axle Nut -- M22 x 1.5mm.
What size is a Ford wheel nut?
WHEEL NUT KIT THREAD SIZE M12.
What size is the axle nut on a 2016 Ford Explorer Sport?
Go with 32 mm and you will be all set. Mike S. George H.
