What size are the brake caliper bolts on a 2006 Ford Escape?
The front brake caliper mounting bolts on a 2006 Ford Escape are typically M12 x 1.5 bolts with a 14 mm hex head. Some production years or trims may use a slightly different pitch (such as M12 x 1.75), so it’s best to confirm against your VIN-specific parts catalog or service manual.
Brake hardware can vary by production date, trim, and whether you’re dealing with front discs or other brake configurations. This article provides the most common size you’ll encounter and guidance on how to verify for your exact vehicle.
Front caliper mounting bolt size and how to identify it
Before attempting to service the brakes, know that there is a dedicated bolt that secures the caliper to the bracket/knuckle. The following details describe the typical size you’re likely to encounter on a 2006 Escape’s front brakes.
- Thread size: typically M12 x 1.5 (some production runs may use M12 x 1.75).
- Nominal diameter: about 12 mm.
- Head size: commonly 14 mm (socket size) for loosening/t tightening.
- Estimated bolt length: roughly 35–45 mm, depending on exact brake setup and rotor thickness.
- Application: these bolts secure the caliper to the mounting bracket/knuckle.
Note: Always verify the exact size for your specific vehicle using the VIN, the factory service manual (FSM), or a parts catalog. Different brake configurations or production changes can alter the bolt size or pitch.
How to verify the correct bolt size for your Escape
Use these steps to confirm you’re using the correct caliper mounting bolts for your 2006 Escape.
- Check the VIN and consult Ford’s official parts catalog or the FSM for the exact bolt specification.
- Measure the bolt currently installed on the vehicle if you’re replacing it, noting diameter, thread pitch, and length.
- When purchasing replacements, opt for OEM bolts or those labeled specifically for the 2006 Ford Escape front caliper mounting hardware.
- Follow the manufacturer’s torque specification when reinstalling (torque values vary; consult the FSM for the exact figure).
Always use proper safety practices when working on brake systems. If you’re unsure about bolt size or torque, seek assistance from a qualified mechanic or consult the official Ford service documentation for your exact VIN.
Summary
For a 2006 Ford Escape, the front brake caliper mounting bolts are typically M12 x 1.5 with a 14 mm hex head, though some vehicles may use M12 x 1.75. Verify the exact specification for your VIN via Ford’s parts catalog or the FSM, and replace with OEM hardware. Always follow the specified torque and safety guidelines when reinstalling brake components.
