What size are the caliper bolts on a 2010 Honda Civic?
The caliper bolts on a 2010 Honda Civic typically measure 12mm in size. This information is based on the standard specifications for the Honda Civic model year 2010.
Detailed Explanation
The caliper bolts on a vehicle are responsible for securing the brake calipers to the brake mounting brackets or steering knuckles. These bolts play a crucial role in ensuring the proper functioning and safety of the vehicle's braking system.
For the 2010 Honda Civic, the standard caliper bolt size is 12mm. This means that the diameter of the bolt shaft is 12 millimeters. The length of the bolt may vary depending on the specific model and configuration of the Civic, but the 12mm diameter is the common specification.
Importance of Proper Caliper Bolt Size
Using the correct caliper bolt size is essential for the following reasons:
- Secure Attachment: The 12mm caliper bolts ensure a tight and secure connection between the brake calipers and the mounting points, preventing any unwanted movement or loosening of the components.
- Brake Performance: Properly tightened caliper bolts help maintain the alignment and positioning of the brake calipers, which is crucial for consistent and effective braking performance.
- Safety: Ensuring the correct caliper bolt size and proper torque specification helps prevent potential brake system failures, which could compromise the vehicle's overall safety and handling.
It is important to always refer to the manufacturer's specifications and use the recommended tools and torque values when replacing or servicing the caliper bolts on a 2010 Honda Civic.
What wrench do you need to remove a brake caliper?
Use sockets and a ratchet to remove the caliper from the suspension.
What is the bolt pattern on a Honda Civic?
Wheel Configuration Reference
| Vehicle Make / Model | Year Range | Bolt Pattern |
|---|---|---|
| Honda Civic (Type R) | 2017 to 2021 | 5x120 |
| Honda Civic (Si) | 2017 to 2020 | 5x114.3 |
| Honda Civic (Si) | 2022 to 2025 | 5x114.3 |
| Honda Civic (All Except Si and Type R) | 2022 to 2025 | 5x114.3 |
What size is the bolt on a 2010 Honda Civic tensioner?
Accessory Belt Tension Bolt - 10 x 59 x 1.25mm - 2006-2022 Honda Civic 1.8L 4-Cylinder - Genuine W0133-3568045.
What size socket is a 2010 Honda Civic lug nut?
Since the lug nuts are 12mm in diameter, you'll need a 19mm socket to remove and install them. A standard 6-point 19mm socket is the proper tool for getting Honda Civic lug nuts off and on. Make sure you're using a quality 6-point socket, not a 12-point one.
What size bolts for post mount calipers?
9-13 mm
For forks and frames with post mounts, with or without brackets and/ or spacers, there must be 9-13 mm of mounting bolt thread engagement when mounting brake calipers. Bolts and brackets may need to be purchased separately.
What size socket for brake calipers?
What size wrench do i need to take the front calipers off to replace my brake pads. Welcome and thank you for allowing me to assist you! to remove the caliper bolts from the bracket, you will need either a 13mm or 15mm socket wrench.
What is the bolt pattern on a 2010 Honda Civic?
Most Honda Civics come stock with a 5x114. 3 bolt pattern and rims ranging in size from 15'' to 20'', depending on year model and trim level.
What size is the caliper bracket bolt?
caliper bracket bolts are M12x1. 5x45 grade 10.9.
What is the bolt on the back of the caliper called?
Remove them and your calipers fall off. Plain and simple. They're often called “caliper bracket bolts” because they attach to the part of your caliper called the bracket, and hold it tight to the spindle or steering knuckle.
What size are the nuts on a Honda Civic 2010?
12 mm x 1.50 thread size, 3/4" and 13/16" hex.
