What size are the lug nuts on a 2012 Honda Fit?
The lug nut size for a 2012 Honda Fit is 12x1.5 millimeters. This means the lug nuts have a diameter of 12 millimeters and a thread pitch of 1.5 millimeters.
Detailed Explanation
The 2012 Honda Fit is a subcompact car that was produced by Honda. Like most vehicles, it uses lug nuts to secure the wheels to the vehicle's hubs. Knowing the correct lug nut size is important for properly maintaining and servicing the vehicle, such as when changing a flat tire or rotating the tires.
According to the information found, the lug nuts on a 2012 Honda Fit have the following specifications:
- Diameter: 12 millimeters
- Thread pitch: 1.5 millimeters
This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. This is a common lug nut size used on many Honda and other Japanese vehicles. Using the correct size lug nuts is crucial for ensuring the wheels are properly secured and to avoid any safety issues while driving.
What size socket for Honda lug nuts?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
What size are the lug nuts on a Honda Fit?
Wheel Nut M12-1.50 Acorn – 19mm Hex, 35mm Length. Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.378″ Length, Chrome (Sold by each)
What size impact wrench do I need to remove lug nuts?
This ensures you have plenty of power to break them loose. For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.
What size socket is my lug nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
How do you find the size of a lug nut?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What is the bolt pattern on a 2012 Honda Fit?
What bolt pattern comes on the Honda Fit? Every generation of Honda Fit comes with a 4x100 bolt pattern. One of the more popular 4-lug bolt patterns out there, you'll find plenty of wheels to choose from when it's time to add some flare to your ride.
What size are the lug nuts on a 2010 Honda Fit?
Thread size: M12-1.50.
What is the bolt pattern for a 2012 Honda?
Most Honda Accords come stock with 17'', 18'' or 19'' rims and a 5x114. 3 bolt pattern.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
