What size are the lug nuts on a 2014 Honda Crosstour?
The lug nuts on a 2014 Honda Crosstour typically measure 12mm in diameter. This is the standard size for the wheels on this model year of the Crosstour crossover SUV.
Detailed Information on 2014 Honda Crosstour Lug Nuts
The 2014 Honda Crosstour is a midsize crossover SUV that was part of the model's second generation, which was produced from 2010 to 2015. The Crosstour was designed as a more stylish and upscale alternative to the traditional Honda Accord sedan.
When it comes to the lug nuts on the 2014 Crosstour, the standard size is 12mm. This is a common lug nut diameter for many Honda and Acura vehicles of that era. The 12mm lug nuts are used to secure the 17-inch or 18-inch alloy wheels that were factory-equipped on the Crosstour.
Why Knowing the Lug Nut Size is Important
Knowing the correct lug nut size for your vehicle is important for a few key reasons:
- Wheel and Tire Maintenance: When changing a flat tire or rotating the tires, you'll need the right size lug wrench to properly loosen and tighten the lug nuts.
- Wheel Replacement: If you're installing new wheels, you'll need to ensure the lug nuts fit the new wheel's lug holes properly.
- Safety: Properly tightened lug nuts are crucial for maintaining wheel integrity and preventing the wheel from coming loose while driving.
Using the wrong size lug nuts can lead to dangerous situations, so it's important to always refer to your vehicle's specifications when performing any wheel or tire work.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size are the lug nuts on a Honda Accord?
Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.378″ Length, Chrome (Sold by each)
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
What size lug nuts are on a Honda SUV?
The lug nuts on most Honda CR-V models from 1997-2025 are 12×1.5 mm with a torque spec of 80 ft-lbs. This means you'll need a 19mm socket to remove or install the lug nuts.
What size are Honda lug nuts?
The lug nut size used on most Honda models is 12×1.5. This means the lug nuts have a diameter of 12mm and a thread pitch of 1.5mm. Some larger Honda trucks and SUVs may use 14×1.5 lug nuts instead. And a few older Honda models use the less common 12×1.25 size.
What size socket do I need for lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are the lug nuts on a Honda Crosstour?
The 2010-2024 Honda Accord Crosstour comes equipped with lug nuts that have a size of M12 x 1.5. This size designation refers to the metric thread size, with M12 indicating a 12mm thread diameter and 1.5 representing the thread pitch (the distance between each thread crest).
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size socket for lug nuts Honda?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
Are Honda lug nuts metric?
Yes, almost all Honda bolts are metric. For example, the most common metric thread sizes of Honda bolts are M12x1. 5mm and M14x1. 5mm.
