What size are the wheels on a 1935 Ford?
The wheels on a 1935 Ford are 16 inches in diameter. This diameter was standard across most 1935 passenger models in Ford's lineup.
Beyond the diameter, the tire size that pairs with those rims varied by model and country of sale. The era commonly used 6.00-16 or 6.50-16 tires, but exact figures can differ based on trim, market, and any restoration choices. Check the specific vehicle’s data plate or factory catalogs for the precise specification.
Historical context of wheel sizing in the 1930s
In the 1930s, wheel sizing varied by manufacturer as automotive design moved from unstandardized setups toward more uniform sizing. For many American car lines, 16-inch rims became a common standard by the mid‑1930s, aligning with bias-ply tires and the riding characteristics engineers aimed to achieve at the time. Ford’s 1935 lineup followed this trend, using 16-inch wheels on essentially all passenger models, with tire widths adapted to trim and market needs.
1935 Ford wheel specifics
Specifics for the 1935 Ford were largely centered on the 16-inch wheel diameter. Tire sizes typically seen with these rims included 6.00-16 and 6.50-16, though exact figures could vary by model and year within the 1935 range. Widths were generally in the 4-inch to 4.5-inch range, reflecting the era’s standard passenger-car formats.
Common tire sizes used with 16-inch 1935 Ford wheels
Before listing the typical options, note that variations existed by model and market. The following sizes were among those commonly configured on 1935 Ford passenger cars:
- 6.00-16
- 6.50-16
These sizes reflect mid‑1930s practice for stock 16‑inch wheels on Ford passenger cars. Always verify the exact specification for a given vehicle by consulting the data plate, owner's manual, or a factory parts catalog, especially if the car has undergone restoration or modification.
How to verify the exact wheel size for your vehicle
To confirm the precise wheel and tire specification on a particular 1935 Ford, start with the vehicle’s data plate or stamping, if present, and compare it to period Ford catalogs or restorations guides. Measuring the rim directly (diameter and width) and checking the tire currently installed can also help; keep in mind that aftermarket replacements may have been fitted over the years. Consulting vintage Ford clubs, dealers who specialize in classic Fords, or experienced restorers can provide model-specific confirmation.
Summary
For a 1935 Ford, the standard wheel diameter is 16 inches, with common tire sizes around 6.00-16 or 6.50-16. Specifics can vary by model and market, and restoration projects should verify exact figures against manuals or catalogs. When in doubt, consult period documentation or an experienced vintage Ford specialist to ensure accuracy.
What size wheels are on a 1934 Ford?
1933-34 Ford 17", 32 spoke, wire wheels. They may fit other years or model as well. Overall they are 18½" in diameter and 4½" wide. The bolt pattern is 5 x 5½".
How much is a 1935 Ford worth?
The value of a 1935 Ford Model 48 Standard can vary greatly depending on its condition, mileage, options, and history. Typically, you can expect to pay around $29,880 for a 1935 Ford Model 48 Standard in good condition with average spec.
How wide are the wheels on a 1935 Ford?
16” x 4”
1935 Wheels are 16” x 4”.
What size are the wheels on a 1936 Ford?
THESE WHEELS TAKE A 16" TIRE, MEASURE 17 1/4" IN DIAMETER OVERALL, 3 1/2" IN BETWEEN BEADS, 4 5/8" WIDE OVERALL, WITH A 5 ON 10 1/4" BOLT PATTERN..
