Loading

What size are the lug nuts on a 2015 Chevy Impala?

The lug nuts on a 2015 Chevy Impala are standard M14 x 1.5, with a 60-degree conical (acorn) seat, used on a 5x115 mm bolt pattern. This configuration is common for the model’s factory wheels and compatible aftermarket wheels that match GM’s lug-seat design.


In plain terms, the 2015 Impala uses five lug nuts per wheel, each nut engaging a stud on a 5-lug, 115 mm bolt circle. If you’re replacing wheels or buying new nuts, confirm these specs on the vehicle’s owner manual or the door jamb sticker, especially when working with aftermarket wheels or different trim levels.


Key specifications at a glance


The following quick reference highlights the essential lug nut characteristics for the 2015 Impala.



  • Bolt pattern: 5 bolts on a 115 mm circle (5x115 mm)

  • Thread size: M14 x 1.5

  • Nut seat: 60-degree conical (acorn) seat

  • Quantity per wheel: 5 lug nuts


These specifications cover the standard factory configuration and many aftermarket wheels designed to match GM’s lug-seat design. If your wheels require a different seat type or diameter, you may need a compatible nut or a different mounting approach.


Seat design and compatibility


GM vehicles like the 2015 Impala use a 60-degree conical seat on the lug nuts. This seat shape must match the wheel's mounting holes and the wheel hub to ensure proper seating and load distribution. When shopping for wheels, always verify that the lug nuts’ seat type matches the wheel’s lug holes to avoid improper seating or damage.


How to verify and maintain lug nuts


Before changing wheels or replacing nuts, use these steps to confirm you’re using the correct hardware and keep the wheels secure.



  • Check the owner’s manual or the driver-side door jamb sticker for lug-nut size and torque information specific to your trim.

  • Inspect the wheel and lug nuts for the correct seat type and compatibility with the wheel holes.

  • When installing, torque the lug nuts to the manufacturer’s specification using a calibrated torque wrench. Re-torque after about 50-100 miles (80-160 km) to ensure proper seating.


Using the right lug nuts and correct torque helps prevent wheel vibration, loosening, or damage to the wheel studs.


Summary


The 2015 Chevrolet Impala uses M14 x 1.5 lug nuts with a 60-degree conical seat on a 5x115 mm bolt pattern, five per wheel. This setup is standard for the model and compatible with factory and aftermarket wheels that match these specifications. Always confirm exact specs from the owner’s manual or door jamb sticker when purchasing replacements, and torque properly to maintain wheel security.

What size socket does a Chevy lug nut take?


The most common Chevy lug nut socket size is 22mm (or 7/8"), especially for models like the Silverado 1500, Suburban, Tahoe, and Colorado. However, not all Chevy vehicles use the same size, as some may use 13/16", 1/2" (12.7mm), or other common sizes depending on the model and year.
 
Common socket sizes 

  • 22mm (7/8"): This is the most frequent size for many light-duty trucks and SUVs, including the Silverado 1500 and Suburban. 
  • 13/16": This is an equivalent size to 22mm and is often listed as the size to use. 
  • Other sizes: Depending on the model and year, some Chevy vehicles may use other sizes, such as 1/2" or M12 x 1.25 for smaller sedans or older models. 

How to confirm the correct size
  • Check your owner's manual: The manual will specify the correct lug nut socket size for your specific vehicle. 
  • Use a socket set with a 1/2-inch drive: This provides enough torque for most lug nuts, and a 1/2-inch drive socket allows you to tighten them with confidence. 
  • Try a 13/16" socket: This is an equivalent size to 22mm and is often listed as the size to use. 
  • Use a socket that can handle the torque: Use a high-quality socket that is designed to withstand the forces of tightening lug nuts to avoid damaging the nut or the socket. 
  • Avoid using cheap chrome sockets: Cheap sockets can crack or shatter under the stress of properly tightening lug nuts. 



What size are the lug nuts on a 2015 Chevy?


Notes: Nut. 14 mm x 1.50 thread size, 7/8" hex, 1.78" length.



What size lug nuts are on a 2015 Chevy Impala?


The lug nut size for a 2015 Chevy Impala is M14 x 1.50. This size specifies a metric thread with a 141414 mm diameter and a 1.51.51.5 mm pitch. It is important to ensure the seat type (e.g., acorn or conical) is compatible with your vehicle's wheels. 

  • Thread Size: M14 x 1.50 
  • Key considerations:
    • Ensure the lug nuts are compatible with your specific wheels (stock or aftermarket) and have the correct seat type. 
    • Confirm the correct size before purchasing, as other vehicles in the Chevrolet lineup may use a different size, such as M12 x 1.50. 



What size lug nut is on a Chevy Impala?


The Chevy Impala lug nut size varies by model year, but common sizes include M12 x 1.50 for many newer models and 7/16-20 for some older models. Always verify the specific thread size, as well as the seat style (e.g., cone, bulge acorn), length, and hex size for your particular vehicle to ensure a correct and safe fit.
 

Model Year (Example) Thread Size Hex Size
2019 M14 x 1.50 Varies
2010 M12 x 1.50 3/4"
1963 7/16-20 3/4"
(function(){
(this||self).Wufxzb=function(c,e,f,l,k){var d=document.getElementById(c);if(d&&(d.offsetWidth!==0||d.offsetHeight!==0)){c=d.querySelector("div");var g=c.scrollWidth-c.offsetWidth,h=Math.min(e?g:0,g);c.scrollLeft=e&&(l||f)?0:h;var a=d.getElementsByTagName("g-left-button")[0],b=d.getElementsByTagName("g-right-button")[0];a&&b&&(e=RegExp("\\btHT0l\\b"),f=RegExp("\\bpQXcHc\\b"),a.className=a.className.replace(e,""),b.className=b.className.replace(e,""),h===0?a.className="pQXcHc "+a.className:(a.className=
a.className.replace(f,""),k&&c.classList.add("pA30Ne")),h===g?b.className="pQXcHc "+b.className:(b.className=b.className.replace(f,""),k&&c.classList.add("FpCCub")),setTimeout(function(){a.className+=" tHT0l";b.className+=" tHT0l"},50))}};}).call(this);(function(){var id='_6MwlafyBD6iii-gPl47dyAc_128';var rtl=false;var gecko=false;var edge=false;var soh=false;
(this||self).Wufxzb(id,rtl,gecko,edge,soh);})();


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.