What size are the lug nuts on a 2015 Ford Edge?
The lug nuts on a 2015 Ford Edge are typically M14 x 1.5 with a 60-degree conical seat, and a common socket size is 21 mm (some wheels may require 22 mm). Always verify the exact size for your specific wheels via the owner's manual or the wheel itself.
Standard lug nut configuration
Understanding the typical setup helps you identify the nut size and seating on most 2015 Edge models.
- Number of lug nuts per wheel: 5
- Thread size and pitch: M14 x 1.5
- Seat type: 60-degree conical (sits flush with the wheel)
- Common wrench/socket sizes: 21 mm, with some wheels requiring 22 mm
- Variations: aftermarket wheels or different trims may alter the exact nut size or seat
In practice, the 2015 Edge follows a standard five-nut pattern with metric M14 x 1.5 threading and a conical seat, but always confirm against your wheel type and vehicle documentation to avoid damage.
How to verify the exact size on your vehicle
If you want to be absolutely sure, check the wheel specifications on multiple reliable references and verify on the wheel itself.
- Inspect the lug nuts on one wheel for any stamped size or markings on the nut itself.
- Measure the hex across the flats with a caliper or ruler to determine whether a 21 mm or 22 mm socket fits snugly.
- Consult the owner's manual, the driver-side door placard, or the Ford dealership for the official lug nut size and torque recommendations for your specific wheel configuration.
Note that wheels swapped from aftermarket suppliers or different trim packages may use a different lug nut size or seating style, so verification is important for safe maintenance and proper wheel installation.
Additional considerations for maintenance and replacements
When replacing lug nuts or wheels, ensure you use hardware that matches the original seating and thread specification. Using the wrong size or seat type can damage studs, wheels, or rotors and may compromise safety. After installation, re-torque the lug nuts according to the vehicle’s guidelines and retorque after driving a short distance as recommended in the manual.
Summary
For the 2015 Ford Edge, the typical lug nut setup is five M14 x 1.5 threaded nuts with a 60-degree conical seat, commonly requiring a 21 mm socket (some wheels may use 22 mm). Always confirm the exact size for your specific wheels by checking the door placard, owner’s manual, or the wheel itself to ensure proper fit and safe operation. If in doubt, consult a Ford dealership or a trusted repair professional.
What size are the lug nuts on a Ford Edge?
14 mm x 1.50
Notes: Nut. 14 mm x 1.50 thread size, 7/8" hex. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
What size lug nuts are on a 2015 Ford Edge?
M14x1. 5 Lug Nuts for 2015-2020 Mustang Edge MKX MKZ Aviator, 20 PCS One-Piece Chrome OEM Factory Style Lug Nuts for Stock Wheels. Compatible With: 2015-2021 EDGE.
What size socket for 2016 Ford Edge lug nuts?
The correct lug nut socket size for a 2016 Ford Edge is 21mm or 7/8 inch. The lug nuts are an M14 x 1.5 thread size.
- Metric: 21mm
- Imperial: 7/8 inch
It is important to use the correct socket size to avoid stripping the lug nut. The M14 x 1.5 size indicates the thread diameter and pitch, but the socket size is determined by the width across the flats of the lug nut.
What size socket for Ford lug nuts?
The most common socket size for Ford lug nuts is 13/16" or 21mm, especially for models like the F-150 and Bronco. However, sizes can vary by model year and specific vehicle, with some models like the Bronco Sport using a 19mm (or 3/4") socket. It is best to confirm the exact size for your vehicle, as some older or different models might use a different size.
- 13/16" or 21mm: This is the most common size for many modern Ford vehicles, including the F-150 and Bronco. Some sources suggest 13/16" may be a slightly tighter fit than 21mm, which can help prevent rounding the lug nuts.
- 19mm (or 3/4"): This size is used on certain models, such as the Bronco Sport.
- Verification: It's important to check your vehicle's manual or confirm the size before buying tools, especially since some models use a different size or have swollen lug nuts that may require a special socket.
- Swollen lug nuts: If you have a Ford with swollen lug nuts, a standard socket may not fit. In these cases, a special "flip" socket, which has a slightly larger size, can be used to remove them.
