Loading

How much horsepower does a 460 Ford engine have?

The 460 Ford engine is a legendary powerhouse, known for its impressive horsepower and torque output. This iconic V8 engine has been a staple in Ford's lineup for decades, powering everything from heavy-duty trucks to high-performance muscle cars. But just how much horsepower does the 460 Ford engine produce?


The Specifications of the 460 Ford Engine


The 460 Ford engine is a large-displacement V8 engine that was first introduced in 1968. It has a displacement of 460 cubic inches (7.5 liters) and features a cast-iron block and heads. The 460 Ford engine was available in various configurations over the years, with horsepower ratings ranging from around 365 to 425 horsepower.


Factors Affecting Horsepower Output


The exact horsepower output of a 460 Ford engine can vary depending on several factors, including:



  • Engine configuration (e.g., carbureted vs. fuel-injected)

  • Camshaft profile and valve timing

  • Compression ratio

  • Exhaust system design

  • Modifications and aftermarket parts


In general, the 460 Ford engine was capable of producing between 365 and 425 horsepower in its stock form, with the higher-end models typically found in high-performance applications like the Ford Thunderbird and Lincoln Continental.p>

The Legacy of the 460 Ford Engine


The 460 Ford engine has a long and storied history, with its powerful performance making it a favorite among enthusiasts and hot rodders. Despite the rise of more modern, fuel-efficient engines, the 460 Ford engine remains a sought-after powerplant for those who value raw, unadulterated power. Its enduring popularity is a testament to the engineering prowess of Ford's designers and the engine's enduring legacy.

How much horsepower can I get out of a 460?


Big-Block Ford Engine Build: Easy 500 HP From the Ford 460
Did you know that Ford built the same big-block for 30 years? They're everywhere, making them a simple score for an easy 500 hp from the Ford 460.



How much HP does a 460 Big Block have stock?


Introducing The Ford 460 Big Block Engine
The 460 engines were made at Ford's Lima, Ohio factory, and share the same 4.36-inch bore size as the 429 size big block but with a different stroke (the 429 is 3.59 inches and the 460 is 3.85 inches). The output for the 460 starting in 1972 was 212 hp and 342 lb.



Is a 460 more powerful than a 500 Magnum?


Feet per second and produces 2868 foot-pounds of energy so slightly more velocity. And energy from the 500 Magnum. But those two bullets would give you about the exact same result.



How much HP can a 460 block handle?


In boosted applications, factory 460 blocks have been known to survive at 1,500-plus horsepower when upgraded with four-bolt main caps and filled with Hard Blok.



What is Ford's best big-block engine?


Virtually every major domestic automaker had one in its stable, and the Ford 460 (385-series or Lima designation) was arguably the best of the breed.



How much HP did the 454 big-block have?


The 454 EFI version was rated from 230 hp (172 kW) to 255 hp (190 kW) and from 385 lb⋅ft (522 N⋅m) to 405 lb⋅ft (549 N⋅m) of torque.



When did Ford stop making the 460 engine?


Coinciding with their eventual downsizing, full-sized Ford and Lincoln-Mercury cars (including the Continental Mark V) last used the 460 for the 1978 model year.



How much horsepower did the Ford 460 have in 1983?


In 1978 Ford pulled the 460 from all of its passenger vehicles, Mercury and Lincoln included. Trucks and vans, on the other hand, continued to benefit from the motor for the next two decades, with power climbing to 225 ponies in 1983 and then 245 a couple of years later (with torque growing to 385 lb-ft).



What was the last year of the Ford 460 engine?


1978
Coinciding with their eventual downsizing, full-sized Ford and Lincoln-Mercury cars (including the Continental Mark V) last used the 460 for the 1978 model year.



What year 460 had the most power?


The first generation was introduced in 1968 and was produced until 1972, this had an Autolite four-barrel carburetor and made 365 horsepower and 485 pound-feet of torque. This is the most powerful of all of the 460s. In 1972 Ford reduced the compression ratio in an effort to get better fuel economy out of the engine.


Kevin's Auto

Kevin Bennett

Company Owner

Kevin Bennet is the founder and owner of Kevin's Autos, a leading automotive service provider in Australia. With a deep commitment to customer satisfaction and years of industry expertise, Kevin uses his blog to answer the most common questions posed by his customers. From maintenance tips to troubleshooting advice, Kevin's articles are designed to empower drivers with the knowledge they need to keep their vehicles running smoothly and safely.