What size are the lug nuts on a 2017 Honda Ridgeline?
The lug nuts for a 2017 Honda Ridgeline use M12 x 1.5 thread with a 60-degree conical seat, tightened to about 80 ft-lbs per wheel, and you’ll typically use a 19 mm wrench to install or remove them. This article outlines the essential specs and practical notes for maintenance and tire work.
To help you service the wheels correctly, here are the key specifications and practical considerations you should know about the Ridgeline’s lug nuts.
- Thread size and seat: M12 x 1.5 with a 60-degree conical (tapered) seat.
- Lug nut hex size: 19 mm (often called 3/4 inch) for standard OEM nuts.
- Studs and pattern: 12 mm wheel studs on a 5-lug pattern typical of Honda Ridgeline platforms.
- Torque specification: Tighten to approximately 80 ft-lbs (108 N·m) per wheel, per Honda guidelines.
- Nut type: Conical-seat (acorn) lug nuts; lock nuts are optional depending on factory or aftermarket setups.
When replacing fasteners or selecting aftermarket parts, verify compatibility with your specific wheel type and trim, and always confirm torque with the vehicle’s manual or a trusted service bulletin.
In implementing these specifications, you’ll ensure proper seating, safety, and reliability during tire changes or wheel maintenance.
Practical guidance for maintenance and replacements
Before performing any wheel work, gather the right tools and follow recommended steps to avoid damaging studs or nuts. The Ridgeline’s lug nuts require careful handling to maintain even seating and proper clamping force across the wheel.
- Tools to use: A 19 mm socket or lug wrench and a calibrated torque wrench set to ~80 ft-lbs.
- Check torque after a few miles: For new wheels or recently tightened lug nuts, recheck torque after driving 50–100 miles to account for settling.
- Inspect threads and seats: Look for corrosion or damage on studs and the conical seat on the lug nuts; replace any damaged hardware.
- Be mindful of aftermarket wheels: Some aftermarket wheels may use different seat types or lug nut dimensions; confirm compatibility with OEM studs and seats.
Following these practical steps helps ensure safe, reliable wheel installation and avoids common issues such as loose lug nuts or improper seating.
Summary
For the 2017 Honda Ridgeline, the lug nuts are M12 x 1.5 with a 60-degree conical seat. Use a 19 mm wrench and torque to about 80 ft-lbs per wheel. Always verify with your owner's manual or a service bulletin for your exact trim and wheel type, and recheck torque after initial driving to maintain proper clamping force.
