What size are the lug nuts on a 2017 Lexus nx200t?
The lug hardware on a 2017 Lexus NX200t is typically M12 x 1.5 with a 60-degree conical seat, uses a 5x110 mm bolt pattern, and normally requires a 21 mm socket for removal or installation, tightened to about 103 Nm (76 ft-lb).
This article explains the standard lug bolt size and related specs for the NX200t, and how to verify them on your specific vehicle, including notes on variations from trim or wheel options.
Technical specs at a glance
Below are the core hardware specs you’ll typically encounter on a 2017 NX200t. If you’re replacing wheels or rotating tires, these values help you select the correct fasteners and torque settings.
- Thread size: M12 x 1.5
- Bolt pattern: 5x110 mm
- Seat type: 60-degree conical (lug bolts)
- Common socket size: 21 mm
- Torque specification: ~103 Nm (76 ft-lb)
Note: Exact numbers can vary if your vehicle uses different wheels (winter wheels, aftermarket wheels) or locking lug nuts. Always consult your owner's manual or the service sheet for the precise torque and seat type for your vehicle.
How to confirm the exact hardware on your NX200t
To verify your car’s lug hardware, check the following sources and steps:
- Owner's manual under Wheels and Tires for the recommended torque and fastener specs.
- Inside the driver’s door jamb sticker for recommended wheel size and lug torque.
- Inspect the lug bolts themselves: M12 x 1.5 thread, 60-degree cone seat, and whether you have standard or locking lug bolts.
- Consult a Lexus dealer or a trusted mechanic if you have aftermarket wheels, as specs may differ.
Concluding note: If you’re unsure, have a professional verify the hardware on your NX200t to ensure safe wheel installation and proper torque to avoid damage or unsafe driving conditions.
Summary
The 2017 Lexus NX200t typically uses M12 x 1.5 lug bolts with a 60-degree conical seat, a 5x110 bolt pattern, and a standard socket size around 21 mm, tightened to about 103 Nm (76 ft-lb). Always verify against your specific wheel setup and refer to the owner's manual or dealer for exact specs.
What size socket for Lexus lug nuts?
The most common Lexus lug nut socket size is 21mm (or 13/16"), but some models may use a 19mm socket. It is best to check your owner's manual or verify the size for your specific vehicle model and year, especially if you have an aftermarket wheel or lug nuts.
- Common size: 21mm (13/16") for many Lexus models, including the RX and UX.
- Other size: 19mm for some Lexus models, such as the IS250.
- Thread size: Lexus factory lug nuts typically have a thread size of M12x1.5mm.
- Verification: Always double-check your vehicle's specific model and year, as sizes can vary, especially with aftermarket parts.
What size are the lug nuts on a 2017 Lexus IS 200t?
Notes: Nut. 12 mm x 1.50 thread size, 13/16" hex.
What size are the lug nuts on a Lexus nx200t?
Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome (sold by each) (Part No. 611-182)
Are all Lexus lug nuts the same?
There are two main thread sizes of Lexus lug nuts: M12x1. 5mm and M14x1. 5mm. Before replacing your Lexus lug nuts, learning a few of the differentiating characteristics is necessary.
