What size are the lug nuts on a 2024 Chevy Trax?
The lug nuts on a 2024 Chevy Trax are typically M14 x 1.5 with a 60-degree conical (acorn) seat, and you’ll usually need a 19mm socket to install or remove them. Always verify with the vehicle’s door jamb placard or owner’s manual, as aftermarket wheels can vary.
Key lug-nut specs for the 2024 Trax
Below are the standard specifications most Trax models use with stock wheels. These details help when you’re changing tires, tightening wheels, or replacing lug nuts.
- Thread size: M14 x 1.5
- Seat type: 60-degree conical (acorn) seat
- Hex size: 19mm (approximately 3/4 inch) wrench/socket
- Number of lug nuts per wheel: 5
- Thread direction: Right-hand threads
These specs cover the stock configuration for most trims. If your Trax has aftermarket wheels or a non-standard setup, sizes can differ and should be confirmed before installation.
Where to verify your exact specs
To be sure you have the correct lug-nut size for your specific vehicle and wheel setup, consult the following resources. This helps prevent damaged studs, stripped nuts, or improper torque.
- Door jamb placard: Located on the driver’s door frame, it lists wheel size, lug-nut size, and torque.
- Owner’s manual: Contains official specifications and guidance for wheel hardware.
- Chevrolet dealer or official GM parts catalog: Provides model-year-specific information, especially if you have aftermarket wheels.
When in doubt, measure the hex on an existing lug nut or consult a certified technician to confirm the exact size for your vehicle’s trim and wheel package.
Variations by trim or aftermarket wheels
Some 2024 Trax configurations or aftermarket wheel packages may use different lug-nut sizes or seat types. Always rely on the door placard or official documentation for your exact vehicle, and avoid mixing lug nuts not specified for your wheels, as this can affect safety and wheel integrity.
In summary, for most 2024 Chevy Trax models, use M14 x 1.5 lug nuts with a 60-degree conical seat and a 19mm socket. Verify with your door-jamb placard or manual to account for any variations tied to trims or aftermarket wheels.
What size are the lug nuts on a 2024 Chevy?
14 mm x 1.50 thread size, 22 mm hex, 1.945" length.
Will a 22mm socket fit 7/8?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What size are Chevy Trax lug nuts?
Product specifications
| Fastener Type | Wheel |
|---|---|
| Thread Size | M12 X 1.5 |
| Exterior Finish | Chrome |
| Color | Chrome |
| Drive Style | Spline |
What size socket fits a Chevy lug nut?
The most common Chevy lug nut socket size is 22mm (or 7/8"), especially for models like the Silverado 1500, Suburban, Tahoe, and Colorado. However, not all Chevy vehicles use the same size, as some may use 13/16", 1/2" (12.7mm), or other common sizes depending on the model and year.
Common socket sizes
- 22mm (7/8"): This is the most frequent size for many light-duty trucks and SUVs, including the Silverado 1500 and Suburban.
- 13/16": This is an equivalent size to 22mm and is often listed as the size to use.
- Other sizes: Depending on the model and year, some Chevy vehicles may use other sizes, such as 1/2" or M12 x 1.25 for smaller sedans or older models.
How to confirm the correct size
- Check your owner's manual: The manual will specify the correct lug nut socket size for your specific vehicle.
- Use a socket set with a 1/2-inch drive: This provides enough torque for most lug nuts, and a 1/2-inch drive socket allows you to tighten them with confidence.
- Try a 13/16" socket: This is an equivalent size to 22mm and is often listed as the size to use.
- Use a socket that can handle the torque: Use a high-quality socket that is designed to withstand the forces of tightening lug nuts to avoid damaging the nut or the socket.
- Avoid using cheap chrome sockets: Cheap sockets can crack or shatter under the stress of properly tightening lug nuts.
