What size are the lug nuts on a Ford Fiesta?
For most Ford Fiesta models, the lug nuts are M12 x 1.5 with a 60-degree conical seat, tightened with a 19 mm wrench, on a 4x108 mm bolt pattern and a center bore of about 63.4 mm. Always verify with your exact year and wheel package.
Common specifications you can rely on
The following specs cover the standard factory wheel setups found on the majority of Fiesta models. They apply to many regional versions across Europe and North America, but there are exceptions depending on year, trim, and any aftermarket wheels.
- Bolt pattern (PCD): 4x108 mm
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (acorn) seat
- Wrench size: 19 mm socket
- Center bore: 63.4 mm
Note: Some markets or wheel packages may use slightly different seat styles or nut sizes for specific wheel options. Always confirm with official specs for your car.
Market and year variations
Regions and typical specs
Across major markets, Ford has kept a consistent lug-nut footprint for the Fiesta, especially on the standard 4x108 wheels. The combination of M12 x 1.5, 60-degree conical seat, and 19 mm lug-nut wrench is the baseline for factory wheels, with a 63.4 mm center bore. Always check your vehicle’s placard or owner's manual for the exact spec if you’re changing wheels or tires.
Special editions or regional packages that include unique wheel designs may call for different fasteners. If you’re fitting aftermarket rims, verify the lug-nut size, seat type, and the hole pattern with the wheel manufacturer and your dealer.
How to verify for your specific Fiesta
To confirm the correct lug-nut size for your exact car, use these sources:
- Owner’s manual
- Driver-side door jamb placard with wheel-nut specs
- Ford official parts catalog or dealership
- VIN-based documentation for factory wheel configurations
When in doubt, consult a qualified technician before purchasing or torquing wheels to avoid cross-threading or improper seating.
Summary
The typical lug-nut specification for most Ford Fiesta models is M12 x 1.5 with a 60-degree conical seat, tightened with a 19 mm wrench, on a 4x108 mm bolt pattern and a center bore of about 63.4 mm. Always verify with your exact year, market, and wheel package, especially if you are installing aftermarket wheels or components.
