What size are the lug nuts on a GX 460?
The lug nuts on the Lexus GX 460 are M14 x 1.5 with a 21 mm hex head, used on a 6x139.7 mm wheel pattern, and are torqued to about 103 N·m (76 ft-lbs). This sizing applies to typical GX 460 models from roughly 2010 through the mid-2020s, but always verify with your specific vehicle year and wheel setup.
The following details break down these specifications and what they mean for wheel maintenance, replacements, and upgrades.
Key specifications for GX 460 lug nuts
Before listing the precise measurements, here is a concise overview of the essential specs you’ll encounter when inspecting or replacing GX 460 wheels.
- Pattern: 6 x 139.7 mm (6 x 5.5 inches)
- Lug nut thread size: M14 x 1.5
- Lug nut seat type: 60-degree conical seat
- Lug nut hex size: 21 mm
- Recommended torque: 103 N·m (76 ft-lbs)
Note: These specifications cover the factory configuration. If you install aftermarket wheels, spacers, or different tires, verify compatibility and re-check torque specifications with the wheel manufacturer or a qualified technician.
Practical considerations for maintenance and upgrades
When changing wheels or performing maintenance, use the correct lug hardware to avoid damage to the seats or threads, and always torque to the manufacturer’s specification. If you’re unsure about your exact year or wheel package, consult the owner’s manual or contact a Lexus dealership for confirmation.
Summary
For the Lexus GX 460, expect six lug nuts with a 6x139.7 mm pattern, M14 x 1.5 thread size, 60-degree conical seat, 21 mm hex head, and a torque specification of about 103 N·m (76 ft-lbs). Always verify against your specific model year and wheel setup, especially if upgrading wheels or changing offsets.
What size socket is a Lexus lug nut?
The lug wrench size for a Lexus lug nut is about 21mm (13/16″). Wheel nuts are critical components to keep the wheels and tires secured. They have a specific thread pitch and seat type, which is determined by the wheel specifications.
What size are the lug nuts on a gx460?
Notes: Nut. 12 mm x 1.50 thread size, 13/16" hex.
Is 1/2 or 3/8 better for lug nuts?
Is 1/2 or 3/8 better for lug nuts? A 1/2-inch drive is better for lug nuts because it covers the torque range most vehicles require and allows you to tighten them with confidence.
Can I use 7/8 socket for 22mm?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
