What size are the wheel nuts on a 2024 RAV4?
The wheel nuts on a 2024 Toyota RAV4 are M12 x 1.5 with a 60-degree conical seat, and the standard lug wrench size is 19 mm. This specification fits the vast majority of factory wheels and common aftermarket setups. If your vehicle uses aftermarket or locking lug nuts, check the owner’s manual or contact a Toyota dealer for the exact specification.
Standard lug nut specifications
These are the typical specifications you should expect on most 2024 RAV4 models with stock wheels.
- Thread size: M12 x 1.5
- Seat type: 60-degree conical (conical-seat)
- Nut style: Standard acorn-style lug nuts; locking nuts may be used on some vehicles
- Wrench size: 19 mm (socket) for the factory nuts
For variations such as aftermarket wheels or locking lug nuts, sizes may differ and a different wrench or key may be required. Always verify with official sources if you have non-OEM hardware.
How to verify for your specific vehicle
To ensure the lug nuts you use match your exact configuration, follow these checks:
- Consult the owner’s manual or service guide for lug nut specifications and torque recommendations.
- Examine the current lug nuts on your wheels for thread size, seat shape, and wrench size; you can measure with a ruler and a socket gauge if needed.
- Check the wheel or hub label inside the driver’s door jamb for wheel specification details that may reference lug hardware.
If you plan to install aftermarket wheels or remove OEM wheels, consult the wheel manufacturer’s documentation and consider professional installation to ensure proper seating and torque.
Notes on locking nuts and aftermarket wheels
Locking lug nuts require the specific key provided with the vehicle; always keep that key in a safe place. Some aftermarket wheels use different lug seat shapes, so verify compatibility before purchase.
Summary: The standard lug nuts for the 2024 RAV4 are M12 x 1.5 with a 60-degree conical seat and a 19 mm wrench size. Deviations can occur with non-OEM hardware, so always confirm with the owner's manual or dealership when in doubt.
Final takeaway: For routine maintenance, use a 19 mm socket to remove/install the lug nuts, and ensure proper torque as specified by Toyota in the manual or service guide.
