How many Litres of oil does a 200 Series take?
The Land Cruiser 200 Series does not have a single oil capacity figure. On most configurations, you’ll need roughly 7.6–9.5 litres of oil, depending on the engine and whether you replace the oil filter. Diesel 4.5L V8 models typically use more oil than the petrol 4.6L V8 variants.
In this article, we break down the oil capacity by engine option and explain what to consider when performing an oil change on the 200 Series. The 200 Series spans multiple markets and model years, with two common engine choices that influence capacity significantly.
Engine options and oil capacities
Note: Exact numbers can vary by year, market, and whether you replace the oil filter. Always check your owner's manual or service manual for the precise capacity for your vehicle.
Diesel 4.5L V8 (1VD-FTV)
The 4.5L turbo diesel is a common LC200 engine. Oil capacity figures typically include the full-flow oil filter:
- With oil filter: about 9.5 litres
- Without oil filter (approximate reference): about 9.0 litres
These figures reflect standard maintenance specifications for diesel LC200 models in many markets, but individual vehicles may vary slightly. Always verify the exact capacity for your configuration in the manual.
Concluding note: For diesel LC200s, plan for roughly 9 litres or a bit more when performing a full oil change with a new filter.
Petrol 4.6L V8 (1UR-FE)
The petrol variant used in some markets is the 4.6L V8. Oil capacity figures typically include the filter:
- With oil filter: around 7.8–8.0 litres
- Without oil filter: around 7.0–7.6 litres
As with the diesel engine, exact numbers can differ by year and market. Confirm the precise capacity from the vehicle’s manual for your specific model.
Concluding note: For petrol LC200s, you should expect about 7.6–8.0 litres with a fresh filter, depending on the exact engine and configuration.
Practical considerations when changing oil
When planning an oil change, include the filter in the total and account for any regional variations in oil capacity notes. Use the recommended oil grade and specification for your engine (viscosity, API/ACEA ratings) and always allow the oil to drain fully before topping up to the correct level on the dipstick after starting the engine and letting it settle.
Summary
The Toyota Land Cruiser 200 Series oil capacity varies by engine. The diesel 1VD-FTV typically requires about 9.0–9.5 litres with a new filter, while the petrol 1UR-FE 4.6L typically requires roughly 7.6–8.0 litres with a new filter. Always confirm exact figures in your owner’s manual or service manual for your specific market, year, and engine code, and consider the filter’s impact on the total during a full oil change. Regular checks with the dipstick and adherence to recommended oil specifications will keep the 200 Series running smoothly.
How much engine oil does a Mitsubishi L200 take?
This Comma Engine Oil fits the following vehicles
| Model | L200 2.5 Dual Cab Turbo (1996-2006) |
|---|---|
| Use Conditions | Normal |
| Unit Size | 5L |
| RANKING | 075 |
| Capacity | 7.5 litre |
How much oil does a 200 Series LandCruiser take?
The LC200 oil capacity varies by engine: the 1UR-FE engine requires 7.5 liters (service fill) before 2020 or 8.0 liters from 2020 onwards. The 1VD-FTV (diesel) engine requires 9.2 liters. Other engine options like the 1GR-FE require around 6.1 liters, and the 2UZ-FE needs about 7.2 liters. Always check your owner's manual for the exact capacity for your specific vehicle.
Engine oil capacity by engine model
- 1UR-FE (Petrol):
- Before 2020: 7.5 liters (service fill)
- From 2020: 8.0 liters
- 1VD-FTV (Diesel): 9.2 liters
- 1GR-FE (Petrol): Approximately 6.1 liters
- 2UZ-FE (Petrol): Approximately 7.2 liters (7.5 quarts)
Important considerations
- Always check the dipstick: After refilling, it is crucial to check the oil level with the dipstick to ensure it's at the correct level and not over or under-filled.
- Consult your owner's manual: For the most accurate information for your specific vehicle, always refer to your owner's manual.
- Filter replacement: The capacities listed are for a service fill, which includes replacing the oil filter.
How many litres does a 200 series hold?
| 4.6-liter Gasoline Engine (1UR-FE) | |
|---|---|
| Suspension - Rear | 4 link coil rigid suspension with lateral rod |
| Brakes Front/Rear | Ventilated discs |
| Minimum turning radius (tire) (m) | 5.9 |
| Fuel tank capacity (liters) | 93+45 (with sub tank) |
How many liters of engine oil for Duke 200?
KTM 200 Duke
| Manufacturer | KTM, Bajaj Auto |
|---|---|
| Seat height | 810 mm (32 in) |
| Weight | 132 kg (291 lb) (dry) |
| Fuel capacity | 10.2 L (2.2 imp gal; 2.7 US gal) |
| Oil capacity | 1.4 L |
