What size are the wheel nuts on a Toyota Celica?
The wheel nuts on a Toyota Celica typically measure 12mm in size. This is the standard size used for the lug nuts that secure the wheels to the vehicle's hubs.
Detailed Information on Toyota Celica Wheel Nuts
The Toyota Celica is a popular sports car that was produced from 1970 to 2006. Across its various generations, the Celica has maintained a consistent 12mm wheel nut size. This size is common for many Toyota and other Japanese vehicle models, as it provides a secure fit for the wheels while being easy to work with using standard tools.
The 12mm wheel nuts on a Toyota Celica serve an important function in keeping the wheels properly attached to the vehicle. They must be tightened to the correct torque specification to ensure the wheels do not become loose, which could lead to dangerous situations while driving.
Changing Celica Wheel Nuts
When changing a tire on a Toyota Celica, it's crucial to use the correct 12mm wheel nuts. Attempting to use the wrong size could strip the threads on the wheel hub, causing expensive damage. It's recommended to always keep a proper 12mm lug wrench in the vehicle for emergency tire changes.
- Ensure all wheel nuts are tightened to the manufacturer's specified torque, typically around 76-89 ft-lbs (103-121 Nm).
- Check the wheel nut torque periodically, as they can loosen over time and need to be re-tightened.
- Replace any damaged or worn wheel nuts to maintain a secure wheel attachment.
Properly maintaining the 12mm wheel nuts on a Toyota Celica is an important part of regular vehicle maintenance to ensure safe and reliable operation.
Do all cars have the same size wheel nuts?
Alloy wheels do use specific nuts and bolts depending on the manufacturer of your car or if you have purchased aftermarket alloys for your car. The most common things for you to check when buying a new set of alloy wheel nuts or bolts is the thread size and seat type.
What size are my wheel nuts?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
What size are Nissan wheel nuts?
Nissan alloy wheel nuts. M12 x 1.25, 21mm Hex set 5 | Spot On Nuts and Bolts.
What size socket to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are normal lug nuts?
Additionally, under-tightened lug nuts may come loose with time. The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size socket for wheel nuts?
You should have steel wheel bolts so you cant really damage them, the soft sockets are intended for alloy wheel nuts as found on air cooled 911. Anyhow you would need a 19mm socket to remove them.
What size is a Toyota axle nut?
The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16" 12 point.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are Toyota wheel nuts?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
Why do Toyota lug nuts swell?
The common reasons for swollen lug nuts are rust, galvanic corrosion, and applying excessive force with bad impact sockets.
