What size is a Subaru Outback lug nut?
The standard lug nut size for a Subaru Outback is 12mm. This is a common size for many vehicles, including other Subaru models, and is used to secure the wheels to the vehicle's hubs.
Understanding Lug Nut Sizes
Lug nuts are the threaded fasteners that hold a vehicle's wheels in place. The size of the lug nut is determined by the diameter of the threaded portion, which is typically measured in millimeters (mm). This size must match the threaded holes in the vehicle's wheel hubs to ensure a secure fit and prevent the wheels from becoming loose or detached while driving.
Subaru Outback Lug Nut Specifications
The Subaru Outback, a popular mid-size crossover SUV, uses 12mm lug nuts to secure its wheels. This is a common size found across many Subaru models, as well as other vehicles from various manufacturers. The specific lug nut size may vary slightly depending on the model year and trim level of the Outback, but 12mm is the standard size.
Importance of Proper Lug Nut Size
Using the correct lug nut size is crucial for the safety and performance of your Subaru Outback. Improperly sized lug nuts can lead to a range of issues, including:
- Wheel Instability: Lug nuts that are too small may not provide a secure enough grip, leading to wheel wobble or even wheel separation while driving.
- Damage to Wheel Hubs: Lug nuts that are too large can damage the threaded holes in the wheel hubs, making it difficult to properly secure the wheels.
- Uneven Tire Wear: Improperly tightened lug nuts can cause uneven tire wear, reducing the lifespan of your tires.
It's important to always use the correct size lug nuts recommended by Subaru for your Outback model to ensure the safety and reliability of your vehicle.
What size bolt for Subaru lug nuts?
Lug Nuts Acorn Conical 12x1. 25 Chrome Factory Style Replacement for Subaru. Fits: Most Subaru vehicles with 12x1. 25 wheel studs and factory alloy wheels that utilize a standard size 60 degree conical seat lug nut.
Are all Subaru lug nuts the same?
No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.
Is 19mm the same as 3/4?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
Are Subaru lug nuts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What size socket goes on a lug nut?
4) Socket Sizes
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size wrench do I need to remove lug nuts?
For lug nuts, a 1/2-inch or even 3/4-inch impact wrench is a better choice.
What size socket for 2010 Subaru Outback lug nuts?
Subaru Outback Lug Nut Socket Size
To remove and install Subaru Outback lug nuts, you'll need a 19mm socket (6-point or 12-point). This fits the 12mm diameter lug nuts used on most models from 2010-2022.
What size are the lug nuts on a Subaru Outback?
The lug nut size on most Subarus is 12mm x 1.25. This includes models like the Impreza, Legacy, Outback, Forester, Crosstrek, and newer WRX/STi models.
How do I know my lug nut size?
How do I know what size lug nuts I need for my car? Check your vehicle's owner's manual, check online at AutoZone, or consult with an associate at an AutoZone store to select the right lug nut sizes.
What size are the wheel nuts on a Subaru Outback?
M12x1. 25 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)
