What size is a Tacoma oil filter?
The standard oil filter size for a Toyota Tacoma is 5.86 inches (149 mm) in height and 3.66 inches (93 mm) in diameter. This size oil filter is commonly used in the Tacoma's 2.7L and 3.5L engines.
Detailed Information on Tacoma Oil Filters
The Toyota Tacoma is a popular mid-size pickup truck that has been in production since 1995. Depending on the model year and engine size, the Tacoma will require a specific oil filter size to ensure proper lubrication and engine protection.
- For the 2.7L 4-cylinder engine, the recommended oil filter size is 5.86 inches (149 mm) tall and 3.66 inches (93 mm) in diameter.
- For the 3.5L V6 engine, the recommended oil filter size is also 5.86 inches (149 mm) tall and 3.66 inches (93 mm) in diameter.
- Some older Tacoma models with 2.4L or 2.5L engines may have slightly different oil filter dimensions, but the 5.86 x 3.66 inch size is the most common.
It's important to always use the correct oil filter size specified by Toyota for your Tacoma model to ensure proper oil flow and engine protection. Using the wrong size filter could lead to oil leaks, reduced oil pressure, or other issues that could damage the engine over time.
Replacing the Oil Filter
Replacing the oil filter on a Tacoma is a routine maintenance task that should be done every time the engine oil is changed, typically every 5,000 to 10,000 miles. Here are the basic steps:
- Locate the oil filter, usually accessible from the top or side of the engine.
- Use an oil filter wrench to loosen and remove the old filter.
- Apply a thin coat of new engine oil to the gasket of the new filter.
- Screw on the new filter by hand until snug, then tighten an additional 3/4 to 1 full turn.
- Start the engine and check for any leaks around the new filter.
Following the manufacturer's recommendations for oil filter size and replacement intervals is crucial for keeping your Tacoma's engine running smoothly and efficiently.
What size socket do I need for my oil filter?
Therefore, first, you need to count how many flutes your current oil filter has. Second, measure the oil filter from edge to edge. Then find a proper oil filter cap wrench from KiWAV Motors. This oil filter is 64.94mm with 14 flutes, so 65x14 flutes oil filter cap wrench will fit.
What is the part number for the oil filter on a Toyota Tacoma 3.5 L?
Replaceable Element Oil Filter #04152-YZZA1 | Autoparts.toyota.com.
How do I know what size oil filter I need?
There are hundreds of different filters, but only one type your car will need. The manufacturer will tell you in your owner's manual what type of filter you need, so all you need to do is match it up.
What size is Toyota oil filter wrench?
64.3mm 14 Flute Oil Filter Wrench - Fits Toyota, Lexus, Honda.
