What size is the axle nut on a 2002 Ford Taurus?
The axle nut size for a 2002 Ford Taurus is 30 mm on the front hubs.
In the 2002 Taurus lineup, most models are front-wheel drive and use a 30 mm hex axle nut to secure the front wheel hubs and CV axles. Rear hub hardware is less commonly encountered in routine maintenance, and the front axle nut is the key specification for typical service work on this model year.
Front axle nut size
Before listing the size, note that the front axle nut is the one you’ll handle when servicing the front suspension and half-shafts. Here is the standard size you’ll typically encounter:
- Front axle nut: 30 mm hex size
Concluding: The 30 mm front axle nut is the standard specification for the 2002 Taurus front hubs; use the correct torque value when reinstalling.
Rear axle considerations
Because the Taurus of that year is primarily front-wheel drive, rear axle nuts are not a routine maintenance item for most owners. If you’re working on a rare configuration or wagon variant with a rear hub assembly, verify the size from the service manual or dealer guidance.
- Rear wheel hub nut size (if present on a rare variant): verify with service manual; sizes can vary by model year and wheel design.
Concluding: For typical 2002 Taurus ownership, the front 30 mm axle nut is the relevant specification; rear hub nuts are not commonly encountered in standard maintenance on FWD models.
How to verify accurately
To confirm the exact size for your vehicle, follow these steps:
- Check the owner's manual or service manual for axle nut size and torque specifications.
- Inspect the existing nut or measure the hex with a caliper or ruler to confirm it fits a 30 mm wrench.
- Provide your vehicle’s VIN to a Ford dealer or parts store to verify the precise hardware for your exact configuration.
Concluding: Verifying the exact size ensures you use the correct tool and avoid damaging the nut or threads.
Summary
The standard front axle nut size for a 2002 Ford Taurus is 30 mm. This covers the typical maintenance needs; always consult the official manual or dealer guidance for your exact vehicle configuration to avoid mistakes.
What size socket for axle nut?
The size of the socket for an axle nut varies by vehicle, but common sizes are 30mm, 32mm, 35mm, and 36mm. It is essential to check your vehicle's specific manual for the correct size, as it can differ between models and may have been changed if the axle has been replaced.
- Common metric sizes: 30mm, 32mm, 33mm, 34mm, 35mm, and 36mm are frequently used, says JustAnswer, Reddit users, Parts Avatar, and Home Depot.
- How to be sure: The most reliable method is to consult your car's owner's manual or a repair manual specific to your make and model to confirm the correct size and torque specifications.
- Socket material: For high torque applications, such as loosening or tightening the axle nut, use a strong, impact-rated socket made from materials like chrome-molybdenum steel to avoid damage to the socket or the nut.
What is the torque on the front axle nut of a 2002 Ford Explorer?
For the 2002 Ford Explorer front hub assembly, the axle nut size is typically 32mm. Torque the nut to 217 lb-ft (295 Nm) to ensure proper preload on the wheel bearing. After tightening, secure the nut with a new cotter pin or locking mechanism.
What size is the axle nut on a Ford Taurus?
M22 x 1.5mm
Notes: Axle Nut -- M22 x 1.5mm. 2013-2019 Ford Taurus Limited 3.5L V6. 2013-2019 Ford Taurus SE 3.5L V6.
What size is the rear axle nut on a 2001 Ford Focus?
Axle Nut for Ford Focus 2000-2011, Rear, 1 Piece, Hex, Stainless Steel, 1.25 inches, UNC, #10, Coarse, Right Hand.
