What size is the axle nut on a Subaru Legacy?
The standard axle nut size for a Subaru Legacy is 32mm. This nut secures the wheel hub assembly to the vehicle's suspension system and is an important component for maintaining proper wheel alignment and safe driving.
Understanding the Subaru Legacy Axle Nut
The axle nut on a Subaru Legacy serves a critical function in the vehicle's suspension and wheel assembly. It is responsible for securing the wheel hub, which contains the wheel bearings, to the vehicle's suspension components. This ensures the wheel can rotate freely while maintaining proper alignment and stability.
The axle nut is a large, thick nut that is tightened to a specific torque specification to prevent the wheel hub from loosening or separating from the suspension. Proper torque is essential to avoid potential safety issues, such as wheel separation, that could lead to a loss of vehicle control.
Replacing the Axle Nut
- When replacing the axle nut, it is important to use the correct 32mm size to ensure a proper fit.
- The nut should be tightened to the manufacturer's recommended torque specification, typically around 150-180 ft-lbs of torque.
- It is recommended to use a torque wrench to ensure the nut is tightened to the proper specification.
- After tightening the nut, the wheel should be checked for any play or looseness to confirm the assembly is secure.
Proper maintenance and replacement of the Subaru Legacy's axle nut is crucial for maintaining the vehicle's safety and performance. Consulting the owner's manual or a professional mechanic is advised to ensure the correct procedures are followed.
Are all Subaru lug nuts the same?
No, not all Subaru lug nuts are the same. There are various wheel nuts for Subaru in the market. Most Subaru vehicles use steel wheel nuts. The most common thread sizes that are used by Subaru cars are M12x1.
What size are axle lug nuts?
More than likely if it's a newer one newer axle or if you buy it from Trailer Parts Unlimited. It's going to be 9 16s. And then you have your 5 8 cone nut you'll see these on 8ks 10ks and 12ks.
What size socket is the axle nut on a 2013 Subaru Impreza?
The axle nut should be 32 mm.
What size socket is a wheel nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Do you need a torque wrench for axle nut?
Avoid Overtightening – Use the Right Tool
MOOG recommends using a torque wrench to tighten the axle nut accurately. DO NOT use an impact wrench.
Are Subaru bolts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What size socket do I need to remove a wheel bearing?
You will need a 32mm deep-well socket to remove that nut. Sorry I have some more information. There is an old style nut and a new style nut and the vehicle could have either one. If it is the old style nut, you will need a 36mm socket.
What size are the wheel nuts on a Subaru Legacy?
What Size are OEM Subaru Lug Nuts? The lug nut size on most Subarus is 12mm x 1.25. This includes models like the Impreza, Legacy, Outback, Forester, Crosstrek, and newer WRX/STi models. It's important to stick with OEM Subaru lug nuts or get high-quality aftermarket nuts in the proper size.
What size is the axle nut socket on a Subaru?
It is a 32mm nut.
What size socket to remove axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
