What size is the CV axle nut on a 2013 Toyota Corolla?

The front CV axle nut on a 2013 Toyota Corolla typically requires a 30 mm socket (30 mm across flats).

Context: The size is important to ensure proper seating and to avoid damaging the nut, threads, or hub. While 30 mm is the standard for most 2013 Corolla front axles, variations can occur due to different hub assemblies, regional specs, or aftermarket parts. Always verify with the official service manual for your exact VIN or have a parts counter confirm the size for your specific vehicle.

What to verify before you service

To avoid mistakes, use these steps to confirm the correct socket size for your particular car.

Common verification steps

These guidelines help you confirm whether 30 mm is correct for your exact vehicle and prevent damage from using the wrong tool.

• Typical size for the 2013 Corolla front axle nut: 30 mm across flats


• Be aware of possible variations if the vehicle has a different hub assembly or aftermarket components


• Verify with the VIN-based official service manual or a trusted parts lookup using your exact year, make, and model

Confirming the correct size before work reduces the risk of tool damage and improper installation.

Additional considerations

Besides the socket size, follow Toyota’s torque specifications and reinstall procedures for the axle nut. Clean threads, correct seating, and proper torque are essential for safe reassembly and long-term reliability.

Summary: For a 2013 Toyota Corolla, the CV axle nut is typically 30 mm across flats. Always verify with official documentation or a VIN-based parts lookup to account for any possible variations.

What size socket do you need for a CV axle?

The common CV axle socket sizes are 32mm and 36mm, but it can vary by vehicle and range from 27mm to 38mm. The best way to ensure you have the correct size is to check your vehicle's service manual or measure the nut, as the size is not universal. You may need a deep socket to fit over the length of the axle shaft. 
Common sizes

• 32mm: A very common size, especially on front-wheel-drive vehicles. 
• 36mm: Another frequently used size. 
• Other common sizes: Depending on the make and model, you may also need a 30mm, 34mm, or 35mm socket. 

How to find the correct size

• Check your service manual: This will provide the exact specification for your vehicle.
• Measure the nut: If you don't have the manual, you can use a caliper to get a precise measurement. 
• Look at the new axle nut: If you are replacing the axle, the new nut may be labeled with the size, or you can take the old nut to an auto parts store to match it. 
• Borrow a set: Many auto parts stores offer a free tool rental program where you can borrow a socket set to use while you work. 

Additional considerations

• Use a deep socket: Axle nuts are located at the end of a long shaft, so a deep socket is often necessary to fit properly. 
• Consider a 12-point socket: Some axle nuts require a 12-point socket, particularly on European and Japanese cars, so it's best to have a set that includes them. 
• Use a breaker bar: Axle nuts are often torqued on very tightly, so you may need a long breaker bar for extra leverage to loosen it. 

What size socket fits a Toyota axle nut?

The most common Toyota axle nut socket size is 39mm, but the size can vary depending on the specific model and year. Some older 4WD Toyota models may use a larger 54mm socket, while other vehicles like certain Tacomas can use a 30mm socket. It's essential to confirm the exact size for your vehicle before purchasing a socket. 
Common sizes

• 39mm: This is the most common size for many modern Toyota trucks, SUVs, and cars. 
  • Specific examples include the 2007-2010 Sequoia, Tundra, and 2008-2010 Land Cruiser. 
• 54mm: Used for many older 4WD models such as the 4Runner (1986-1995), Land Cruiser (1975-2007), and Pickup Truck (1979-1995). 
• 30mm: Found on certain vehicles like the 2012-2017 Toyota Camry. 
• 28mm: Used on some Tacoma models, such as the 1995-2000 4WD versions. 

Before you begin

• Confirm your vehicle's specific size: Always verify the correct size for your vehicle's make, model, and year.
• Get the right type: Many Toyota axle nuts use a 12-point socket, but some smaller, older ones may use a 6-point socket. 
• Note the length: Axle nuts can be recessed, so a deep-well socket is often necessary. 
• Consider impact sockets: Using a high-quality, impact-grade socket is highly recommended for loosening or tightening these very tight nuts, suggests this YouTube video and this YouTube video. 

What size is the axle nut on a 2013 Toyota Corolla?

The 2013 Toyota Corolla axle nut is an M22 x 1.5mm thread size, and it requires a 30mm, 12-point socket for removal. The nut is often staked or "peened" over, so you will need to unstake it with a punch before unscrewing it.
 

• Thread Size: M22 x 1.5mm 
• Socket Size: 30mm, 12-point 
• Important Note: Before loosening, use a punch to raise the staked portion of the nut until it's no longer interfering with the threads. 

What size socket is the axle nut on a 2010 Toyota Corolla?

And the tools we're going to need is uh this uh 32 mm socket right here it's a 12point socket for this axle bolt.