What size is the hub nut on a 2004 Ford Explorer?
The hub nut size on a 2004 Ford Explorer is 1-1/2 inches or 38 millimeters. This nut secures the wheel hub assembly to the vehicle's suspension and is a critical component for safe and proper wheel installation.
Detailed Explanation
The hub nut on a 2004 Ford Explorer is responsible for holding the wheel hub assembly in place, which includes the wheel bearing, brake rotor, and other related components. This nut must be properly tightened to the specified torque to ensure the wheel assembly remains secure and functioning correctly.
The 2004 Ford Explorer uses a 1-1/2 inch or 38 millimeter hub nut, which is a standard size for many Ford vehicles of that era. This size nut provides the necessary clamping force to keep the wheel hub assembly firmly attached to the vehicle's suspension.
Importance of Proper Hub Nut Maintenance
Maintaining the proper hub nut size and torque is crucial for the safe operation of a 2004 Ford Explorer. If the hub nut is not tightened to the correct specification, it can lead to a variety of issues, including:
- Wheel separation, which can result in a loss of vehicle control and a serious accident
- Premature wear or failure of the wheel bearing, causing vibrations and potential wheel bearing replacement
- Brake rotor damage, leading to uneven braking and the need for rotor replacement
It is essential to use the correct size hub nut and to tighten it to the manufacturer's recommended torque specification when servicing or replacing the wheel hub assembly on a 2004 Ford Explorer.
What size socket to remove axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size is the hub nut on a 2013 Ford Explorer?
M22 x 1.5mm
Notes: Axle Nut -- M22 x 1.5mm.
What is the torque spec for wheel hub nuts?
Value. The number of foot pounds will depend on the type of vehicle The Hub is being installed. On. That's why on the majority of the part boxes that require the axle nut to be tightened.
Do you need a torque wrench for axle nut?
Avoid Overtightening – Use the Right Tool
MOOG recommends using a torque wrench to tighten the axle nut accurately. DO NOT use an impact wrench.
What size is a transit hub nut?
Rear Hub Nut Socket 65mm - Ford Transit RWD ( -2014) AST6182 is used to remove and install the Rear Hub Nut on Ford Transit RWD models 2006 - 2014.
What size is a Ford wheel nut?
WHEEL NUT KIT THREAD SIZE M12.
What size socket is a wheel nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are the nuts on a 2013 Ford Explorer?
1/2"-20 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)
What size is a front axle nut?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
What is the torque on the axle nut on a 2004 Ford Explorer?
184 ft/lbs
The axle nut to hub should be torqued to 184 ft/lbs.
