What size is the oil drain bolt on a Honda Civic?
The oil drain bolt on a Honda Civic typically has a size of 17 mm. This is the standard size used for the oil drain plug on most Honda Civic models, allowing for easy oil changes and maintenance.
Detailed Information on the Honda Civic Oil Drain Bolt
The oil drain bolt on a Honda Civic is an important component that allows you to easily drain the engine oil during routine maintenance. This bolt is located at the bottom of the oil pan and must be removed to let the old oil flow out before refilling the engine with fresh oil.
- The standard size for the Honda Civic oil drain bolt is 17 mm.
- This size is consistent across most Honda Civic models, including the sedan, coupe, and hatchback versions.
- The 17 mm size allows for the use of a standard 17 mm wrench or socket to remove and tighten the bolt.
- It's important to ensure the bolt is properly tightened to the correct torque specification to prevent leaks.
Knowing the correct oil drain bolt size is crucial for performing oil changes on your Honda Civic. Having the right tools on hand, such as a 17 mm socket or wrench, will make the oil change process much easier and ensure the job is done correctly.
What size socket is my drain plug?
What size wrench to use for an oil drain plug depends on the size of the oil drain plug itself, which is a long bolt head. There is no universal oil plug size, but they do come in just a few several standard sizes, such as ¼ inch (. 6 centimeters), 3/8 inch (. 9 centimeters), ½ inch (1.3 centimeters), etc.
Are all Honda drain plugs the same size?
14 mm. It is the same as on all the Hondas and Acuras.
What size socket is a Honda Civic plug?
14mm Spark Plug Socket.
What size is the oil drain plug washer on a Honda Civic?
14mm
Oil Drain Plug Washer 14mm. Recommended to be replaced each oil change.
What size socket to change oil in Honda?
The drain plug is located on the back of the oil pan and takes a 17mm socket or wrench.
What size is the drain plug on a Honda?
5 Oil Drain Plugs M14-1.5 17mm Hex Compatible with Acura & Honda.
What size wrench for Honda Civic oil plug?
The Honda Civic oil pan drain plug has a m14 X1. 50 bolt with a 17mm head. When performing an oil change on the car You will first want to make sure that the vehicle has been parked and off for a couple of hours. Otherwise, the oil in the car will be very hot and You could burn Yourself.
What size is the oil bolt on a Honda Civic?
Dorman – Standard Engine Oil Drain Plug: M14-1.50 Thread, 17 mm Head, 1 Pack (Part No. 090-075CD)
