What size is the oil filter socket on a 2010 Toyota Corolla?
The oil filter socket size for a 2010 Toyota Corolla is typically 64 mm or 2.5 inches. This is a common size for many Toyota models, including the Corolla, and is used to remove and install the oil filter during routine maintenance.
Determining the Correct Oil Filter Socket Size
The oil filter on a 2010 Toyota Corolla is located on the engine block, and to remove it, you'll need the appropriate size socket. The size can vary depending on the specific model year and engine, but for the 2010 Corolla, the most common size is 64 mm or 2.5 inches.
To confirm the exact size, you can check the owner's manual or consult with a Toyota dealership or certified mechanic. They will be able to provide the correct information for your vehicle's make, model, and year.
Importance of Using the Right Oil Filter Socket
- Proper Fit: Using the correct size socket ensures a secure and tight fit on the oil filter, allowing you to easily remove and install it without stripping the filter or damaging the housing.
- Efficient Removal: The right-sized socket provides the necessary leverage and grip to loosen and tighten the oil filter, making the job quicker and easier.
- Avoiding Damage: Using the wrong size socket can lead to rounding out the filter, making it difficult or impossible to remove, and potentially causing damage to the engine components.
It's important to always use the recommended oil filter socket size for your 2010 Toyota Corolla to ensure a successful and safe oil change process.
What size is the oil filter cup wrench on a Toyota?
64mm 14 flute oil filter wrench for cartridge style oil filter system on Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines, and used to remove Toyota 15620-31060, 15620-36020 and 15620-36010 genuine oil filter cap, doesn't fit spin-on oil filter.
What size oil filter wrench for 2010 Toyota Corolla?
64mm
The 64mm 14-flute design follows OEM specifications, and is a perfect fit to remove oil filters and cartridge style filter system from these vehicles: Toyota Prius (2010-2016), Prius V (2012-2016), Corolla (2009-2016), Lexus CT200h (2011-2016), Scion xD, tC, iQ, iM.
How to remove oil filter 2010 Corolla?
On just going to break that loose. And then remove it. By. Hand go ahead and remove the filter cartridge wipe off any oil going to put the new filter. In make sure you remove the old o-ring.
What size is the oil filter cap on a Toyota Corolla?
64mm Oil Filter Cap-Wrench For Toyota Camry Corolla Highlander RAV4 Lexus Scion.
What size socket do I need to remove the oil?
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
How big is a Toyota oil filter?
(3 pack) Toyota 90915-YZZN1 Original Equipment Oil Filter for Toyota and Lexus Height 3.3" Width 3.3" Length 3.3" Weight 6.4 Ounces.
What size socket is a Toyota oil filter?
64.3mm 14 Flute Oil Filter Wrench - Fits Toyota, Lexus, Honda.
What size is the oil nut on a 2010 Toyota Corolla?
M12 x 1.25 thread. With 14 mm Head. Dorman - AutoGrade - Oil-Tite!.
What is the dia mm for a Toyota oil filter?
64.16mm
Both styles of oil filter housing measure 64.16mm. For sake of simplicity we refer to the diameter as 64mm. The housing will also expand and contract slightly due to weather or heat from the engine.
How to change the oil filter on a 2010 Toyota Corolla?
On just going to break that loose. And then remove it. By. Hand go ahead and remove the filter cartridge wipe off any oil going to put the new filter. In make sure you remove the old o-ring.
