What size is the oil filter socket on a Toyota Corolla?
The oil filter socket size most commonly needed on Toyota Corollas is 65 mm. The exact size can vary by engine and year, so verify for your specific model.
In this article we break down why sizes vary, how to identify the correct size for your exact Corolla, and how to confirm before you buy or use a wrench during an oil change.
Common sizes you’re likely to encounter
Here is the size you’ll most often need for the standard spin-on oil filters found on a wide range of Corolla engines. This focuses on the most common scenario so you can prepare the right tool for the job.
- 65 mm cap-style oil filter wrench: This is the standard size used by the majority of Corolla engines with spin-on filters across many generations. It fits the typical 65 mm oil filter cap and is the tool you’re most likely to need.
Note: Some regional or older Corolla variants may use a different cap size or a cartridge-style filter housing that requires a dedicated cap. Always verify against your specific model.
How to verify the correct size for your exact Corolla
To ensure you have the right tool for your particular model, follow these steps. This helps avoid buying the wrong socket and potentially damaging the filter housing.
- Locate your engine code and year from the vehicle’s VIN plate or owner’s manual. The engine code helps determine the exact filter arrangement used in your model.
- Consult the official service manual or a trusted parts catalog for your year and engine. Look up the oil filter removal tool specification; it will list the exact cap size if a cap-style filter housing is used.
- Inspect the oil filter cap itself: many Toyota caps have the size stamped or etched on the edge. If you can read “65 mm” (or another size), that’s your wrench size.
- If there is no stamping, measure across the filter cap diameter with a ruler or calipers to estimate the closest standard size, then confirm with the manual or a parts store.
- When in doubt, bring the old filter cap or the filter to an auto parts retailer to verify the correct socket size before attempting an oil change.
Using the incorrect size can strip the cap or damage the housing, so double-check before you apply force.
Summary
For most Toyota Corolla models with spin-on oil filters, a 65 mm oil filter socket is the standard tool. Always confirm for your exact year and engine variant by consulting the service manual or inspecting the cap for its size marking. If you’re working on a cartridge-style filter or a less common regional variant, expect a different tool, and verify before you start the job.
How many mm is a Toyota oil filter?
64.16mm
Toyota Oil Filter Housing Diameter
There is information out there that suggests that there is both a 65mm and 65.5mm housing, referring to the diameter of the 14 point ring on the top. Neither measurement is correct. Both styles of oil filter housing measure 64.16mm.
What size is the oil filter wrench on a Toyota Corolla?
A 64mm, 14-flute oil filter wrench is the correct size for many Toyota Corolla models, especially those with the 1.8L engine and a cartridge-style filter. You will also need a 3/8-inch drive ratchet to use the wrench to remove the filter housing.
- Size: 64mm with 14 flutes is the correct size for the filter housing cap.
- Drive Size: A 3/8-inch drive ratchet is needed to turn the wrench.
- Tool Type: This is a special cap-style wrench for the cartridge filter housing, not a universal wrench for older spin-on filters.
What kind of oil filter do I need for a 2013 Toyota Corolla?
The 2013 Toyota Corolla oil filter number is 04152-YZZA6 for the Genuine Toyota oil filter. Other filter part numbers that are compatible or replacements include 04152-40060 and 04152-37010, and brands like WIX and Fram offer aftermarket options.
- Genuine Toyota: 04152-YZZA6
- Other compatible Toyota part numbers: 04152-40060 and 04152-37010
- WIX: 57064
- Fram: CH10358
Do all Toyotas use the same oil filter wrench?
COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines.
