What is the bolt pattern on a 2011 Acura TL?
The bolt pattern on the 2011 Acura TL is a 5-lug setup with a 114.3 mm diameter lug circle (5x114.3). This is the standard pattern you’ll encounter on most Acura/Honda models from that era.
Bolt pattern and fitment basics
Before replacing wheels or choosing adapters, it helps to know the core measurements that determine fitment on the 2011 TL.
- Bolt pattern: 5x114.3 mm (five lug holes on a 114.3 mm circle)
- Center bore: 64.1 mm
- Lug nut size/thread pitch: M12 x 1.5
- Common stock wheel sizes: typically 17–18 inches in diameter, with various widths
These specifications guide compatibility with aftermarket and OEM wheels. Always verify exact numbers on the wheel or adapter you plan to use and confirm with the manufacturer if you have any doubt.
Practical considerations for wheel upgrades
Matching the bolt pattern is essential, but you should also consider offset and hub-centric fitment. The TL’s stock wheels are designed for a specific mounting offset and hub bore, and aftermarket wheels can vary.
Hub-centric rings and offset considerations
If your new wheels aren’t hub-centric to the Acura hub, you may need hub-centric rings to ensure proper centering and reduce vibration. Always confirm bore size and ring requirements with the wheel manufacturer.
For any wheel upgrade, double-check the exact specifications for your vehicle’s year and trim to avoid fitment issues. When in doubt, consult a tire and wheel professional or your dealer.
Summary
In brief: the 2011 Acura TL uses a 5x114.3 bolt pattern, with a 64.1 mm center bore and M12x1.5 lug nuts. For wheel replacements, verify offset and hub-centric requirements in addition to the bolt pattern, and seek professional guidance if needed.
