What size is the oil filter wrench on a Toyota Tundra?
Most Toyota Tundra models use a 65 mm cap-style oil filter wrench to remove the spin-on filter, but the exact size can vary by engine and year. If your truck uses a different filter type or a non-standard brand, you may encounter 64 mm or 68 mm caps, or need a strap wrench for a canister-style filter.
Engine variations and wrench sizes
The Tundra has equipped several engines over its lifetime, and the filter size is not universal across all years. The 4.0-liter (1GR-FE) and 3.4-liter turbocharged V6 options, as well as the larger 5.7-liter (i-Force V8) configurations, commonly use a 65 mm cap-style oil filter wrench. Some older or less common configurations can require a 64 mm or, more rarely, a 68 mm cap. If your Tundra uses a canister-style filter rather than a spin-on type, a strap or chain wrench designed for canister filters may be necessary.
Before you buy a tool, confirm the exact size for your engine code and year. If you’re uncertain, measure the filter diameter or check the official service manual for your truck’s specification.
- 65 mm oil filter wrench cap (most common for spin-on filters on 4.0L and 5.7L Toyota engines)
- 64 mm oil filter wrench cap (occasionally used on certain years or aftermarket filters)
- 68 mm oil filter wrench cap (less common; may appear with some brands or specific model years)
- Strap or chain wrench for canister-style filters or when a cap wrench doesn’t fit
Below are the sizes you may encounter on Toyota Tundra engines, along with notes on when each is used.
In practice, most Tundra owners will use a 65 mm cap-style wrench. If you find your filter is noticeably smaller or larger, match the tool to the actual diameter or switch to a strap wrench for a canister filter.
How to confirm the correct size for your Tundra
Use these steps to verify the proper tool size for your particular vehicle:
- Check the owner's manual or the official Toyota service information for your engine code and the corresponding filter size.
- Look at the filter itself for a part number or size indication, and cross-check with common 65 mm, 64 mm, or 68 mm cap wrenches.
- Measure the outside diameter of the filter housing or spin-on filter: measure across the widest part of the canister to determine the closest cap size.
- When in doubt, bring the filter or a photo to an auto parts store to confirm the correct wrench size before purchase.
Note: If your Tundra uses a canister-style filter, you will likely need a strap wrench or a dedicated canister filter wrench in the appropriate size, rather than a cap-style wrench.
Summary
The most commonly recommended oil filter wrench size for Toyota Tundra models is 65 mm for spin-on filters, but sizes of 64 mm or 68 mm can appear depending on the engine and year. Always verify against your specific engine code and filter type, and use a strap wrench for canister-style filters if needed. Accurate sizing helps ensure you remove the filter safely and avoid damaging the filter or housing.
What size is the oil filter socket on a 2013 Toyota Tundra?
Use a 27mm or 1-1/16″ drive socket with a ratchet to remove the filter.
What tools do you need for an oil change Tacoma?
To perform a Toyota Tacoma oil change, you will need basic tools like a 14mm socket for the drain plug, a 3/8" ratchet and extension, an oil drain pan, and an oil filter. For a 3rd generation 3.5L V6, a special 64mm 14-flute oil filter housing socket, a 3/8" square drive bit for the filter housing drain cap, and a torque wrench are also necessary. Recommended additional tools include safety glasses, gloves, rags, and an oil funnel.
This video demonstrates the basic tools and process for a Toyota Tacoma oil change: 1mReid NeuYouTube · Feb 4, 2024
Essential tools and supplies
- Socket and ratchet: A 14mm socket is needed for the oil drain plug. A 3/8" ratchet and extension will also be required for various steps.
- Oil filter wrench: For models with a cartridge-style filter, a special 64mm 14-flute oil filter housing socket is essential.
- Oil drain pan: A pan with a capacity of at least 5 quarts is needed to catch the old oil.
- Torque wrench: To tighten the drain plug and oil filter housing to the correct specifications, a torque wrench is recommended.
- Safety gear: Gloves and safety glasses to protect yourself from hot oil and potential spills.
- Oil funnel: To pour the new oil into the engine without spilling.
For 3rd generation Tacomas (3.5L V6)
- Drain cap bit: A 3/8" square bit is used for the oil filter housing drain cap.
- Filter housing socket: A 64mm 14-flute socket is required for the filter housing.
- Drain tool: A special tool is available to drain the oil from the filter housing before removing it, which keeps the process cleaner.
- Skid plate sockets: A 12mm socket may be needed to remove the skid plate for access to the filter.
- New O-rings: You will need to replace the O-rings on the oil filter housing after removing the old ones.
Other helpful items
- Rags: To wipe up any spills.
- Jack, jack stands, or ramps: To lift the truck for better access if needed.
- New drain plug washer: A new washer for the drain plug is recommended to prevent leaks.
- Fumoto valve: A drain valve that can be installed to make future oil changes easier and cleaner.
Do all Toyotas use the same oil filter wrench?
COMPATIBLE WITH ALL TOYOTA CARTRIDGE STYLE OIL FILTERS - The Motivx Tools 64.3mm 14 flute oil filter wrench is compatible with all Toyota and Lexus cartridge style oil filter caps from 1.8L - 5.7L engines.
What size oil filter wrench for Toyota Tundra?
64mm
Aluminum Oil Filter Wrench for Toyota Camry, Lexus, Tundra, 4Runner, Highlander, RAV4 and More, 64mm 14 Flutes, Black.
