What size is the oil pan bolt on a Honda Accord?
The oil pan bolt on a Honda Accord typically measures 12mm in size. This is a standard size used for the oil pan drain plug on many Honda vehicles, including the popular Accord model.
Detailed Information on the Oil Pan Bolt Size
The oil pan on a Honda Accord is located at the bottom of the engine, and the drain plug or bolt is used to remove the old oil during routine maintenance. The size of this bolt is an important detail for anyone performing an oil change or other work on the vehicle's engine.
According to the information gathered from various automotive repair guides and forums, the most common size for the oil pan bolt on a Honda Accord is 12mm. This size is used across many Honda models, though there may be slight variations depending on the specific year, engine size, or other factors.
Why the Oil Pan Bolt Size Matters
Knowing the correct size of the oil pan bolt is crucial for a few reasons:
- Proper Removal and Replacement: Using the right size wrench or socket is essential for safely removing and reinstalling the oil pan bolt. Using the wrong size can damage the bolt or the oil pan threads.
- Avoiding Leaks: The oil pan bolt needs to be tightened to the proper torque specification to ensure a tight seal and prevent oil leaks. Using the correct size bolt is part of this process.
- Maintenance Efficiency: Having the right tools on hand, including a 12mm socket, makes oil changes and other maintenance tasks on a Honda Accord much quicker and easier.
Knowing the standard 12mm size for the oil pan bolt on a Honda Accord can save time, money, and frustration when performing routine maintenance or repairs on the vehicle.
What size socket do I need to remove an oil pan plug?
3/8-inch
Place a 3/8-inch (0.9 centimeters) socket in the socket wrench, fit it over the drain plug's nut and turn it counterclockwise. The oil drain plug should open easily, draining the used oil from the engine. Make sure to place a bucket and some newspaper under the car's engine to catch all the draining oil.
What size is a Honda oil drain bolt?
Oil drain pan opening is a 14mm diameter opening. Oil drain plug is an M14, this takes thread count and "pitch" (the "aggressiveness" of the the angle of the threads) into account. The "head" of the oil drain plug is 17mm. So to remove/install the engine oil drain plug, you will need a 17mm socket or wrench.
What size is the oil pan socket on a Honda Accord?
2016 Honda Accord Bolt Plug, 14Mm.
What size wrench for Honda Accord oil drain plug?
Moving back a little bit towards the rear of the vehicle is the oil pan and on the backside of that is the drain plug for the oil pan. I used a 17mm socket and wrench to remove the oil drain plug and drain the oil into a catch pan below.
