What size is the rear hub nut on a 2005 Ford Focus?
The rear hub nut size on a 2005 Ford Focus is 22mm. This is the standard size used for the rear wheel bearings on this model year of the Ford Focus compact car.
Detailed Information on the 2005 Ford Focus Rear Hub Nut
The 2005 Ford Focus is part of the second generation of the popular compact car, which was produced from 2004 to 2011. The rear hub nut is an important component that secures the rear wheel bearing assembly to the vehicle's suspension.
- The rear hub nut on a 2005 Ford Focus measures 22mm in diameter.
- This 22mm size is consistent across all trim levels and configurations of the 2005 Ford Focus.
- The rear hub nut is made of steel and is tightened to a specific torque specification by Ford, typically around 200-250 Nm (150-180 ft-lbs).
- Proper tightening of the rear hub nut is crucial to ensure the wheel bearing functions correctly and there is no play or looseness in the rear suspension.
When servicing or replacing the rear wheel bearings on a 2005 Ford Focus, it's important to use the correct 22mm size rear hub nut and tighten it to the manufacturer's recommended torque specification. This will help maintain the vehicle's handling, safety, and overall performance.
What is the torque spec for rear axle nut?
On some wheel bearings sets and hub units, the axle nut secures the outer flange to a CV joint or stub axle. As the nut is tightened, it pulls the flange and axle together to set the preload of bearings. These axle nuts will have specifications as low as 130-foot pounds and as high as 300-foot pounds.
What size is the nut on a Dana 30 axle?
Dana 30 axle hub nut 36mm.
What size nut is a wheel nut?
The tool size needed for removal and installation depends on the type of lug nut. The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What are the nut sizes?
Metric vs.
Hex nuts are available in both metric and standard (Imperial) measurements: Metric Sizes: Common sizes include M6, M8, and M10. Standard (Imperial) Sizes: Frequently used sizes are 1/4", 3/8", and 1/2".
What size socket for Ford Focus wheel nuts?
19mm Hex
Ford Focus wheel nuts specs for these are: 19mm Hex head.
What size is the rear axle nut on a 2009 Ford Focus?
The axle nut size is 31mm.
What is the torque on the rear hub nut on a Ford Focus?
The nut should be tightened to 174 ft-lb of torque.
What size is the rear hub nut on a 2007 Ford Transit?
Rear Hub Nut Socket 65mm - Ford Transit RWD (2006 - 2014)
What is the torque spec for the axle nut on a 2003 Ford Focus?
This is from the Ford manual. 235 NM convertes to 173 Foot LBS that spec is correct.
What size nut is on an axle nut?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
