What size is the wheel bearing nut on a Dodge Ram 2500?
The wheel bearing nut size on a Dodge Ram 2500 is typically 1-1/2 inches or 38 millimeters. This large nut secures the wheel hub and bearing assembly to the vehicle's suspension and allows the wheel to rotate freely.
Understanding Wheel Bearing Nuts
The wheel bearing nut on a Dodge Ram 2500 serves a critical function in the vehicle's suspension and drivetrain. This nut tightens the wheel hub and bearing assembly, which allows the wheel to spin smoothly without any play or wobble. The proper torque specification for this nut is crucial to ensure safe and reliable operation of the vehicle.
Dodge Ram 2500 Wheel Bearing Nut Specifications
- Nut Size: 1-1/2 inches or 38 millimeters
- Torque Specification: 250-300 ft-lbs (339-407 Nm)
- Thread Pitch: Right-hand thread
- Material: Steel, often with a nylon locking insert
It's important to use the correct size and torque specification when replacing or tightening the wheel bearing nut on a Dodge Ram 2500. Failure to do so can lead to wheel separation, suspension damage, and potentially dangerous driving conditions.
Accessing the Wheel Bearing Nut
To access the wheel bearing nut on a Dodge Ram 2500, you'll need to remove the wheel and brake components. This typically involves the following steps:
- Loosen the lug nuts on the wheel
- Jack up the vehicle and remove the wheel
- Remove the brake caliper and rotor
- Expose the wheel bearing nut, which is located at the center of the wheel hub
Once the wheel bearing nut is accessible, you can use a large socket and torque wrench to tighten it to the proper specification. It's crucial to follow the manufacturer's recommended torque values to ensure the wheel assembly is properly secured.
What size socket do I need to remove a wheel bearing?
You will need a 32mm deep-well socket to remove that nut. Sorry I have some more information. There is an old style nut and a new style nut and the vehicle could have either one. If it is the old style nut, you will need a 36mm socket.
What size is the axle nut on a 2001 Dodge Ram 2500?
The axle nut size for modern Dodge Ram 2500 trucks will be 46mm. When You are adding or removing the lug nuts from a car then You will want to be careful not to damage them. If You overtighten them then You run the risk of snapping them or stripping them, especially if they are old or rusted.
What size is the wheel bearing nut on a 2016 Ram 3500?
It is an 1 11/16" or a 43mm Checker's Auto, Napa, Some oreilys carry a 1/2'' drive impact version.
What size socket is a wheel nut?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What is the torque on the axle nut on a Dodge Ram 2500?
Tighten the spindle nut to 149 ft-lbs 21. Rotate the axle 5 to 10 times to seat the hub bearing 22. Tighten the spindle nut to a final torque of 263 ft-lbs 23.
How much does it cost to replace a wheel bearing on a Ram 2500?
The average cost for a Dodge Ram 2500 Wheel Bearing Replacement is between $439 and $465. Labor costs are estimated between $98 and $123 while parts are typically priced around $342. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What size is the front wheel bearing nut on a 2014 Ram 2500?
The front axle nut size on a 2014 Ram 2500 series is 1 and 5 /16 of an inch. This is a very large nut and usually You will need a specialty socket to be able to remove it from the vehicle. I recommend using an impact driver to remove this nut because it is going to be held in place very tightly.
What size are the wheel nuts on a 2018 Ram 2500?
14 mm x 1.50 thread size, 13/16" and 7/8" hex.
What size socket to remove axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size is the axle nut on a 2017 Ram 2500?
Re: Axel Nut Size On 5th Gen RAM 2500? 34MM.
