What size lug nuts does Toyota use?
Toyota vehicles use a variety of lug nut sizes depending on the model and year. Knowing the correct lug nut size is essential for properly maintaining and servicing your Toyota. In this article, we'll provide a detailed overview of the common lug nut sizes used by Toyota.
Common Toyota Lug Nut Sizes
The most common lug nut sizes used by Toyota are:
- 12mm - This is the most common lug nut size found on Toyota vehicles, including models like the Camry, Corolla, RAV4, and Tacoma.
- 14mm - Larger Toyota trucks and SUVs, such as the Tundra, Sequoia, and 4Runner, often use 14mm lug nuts.
- 17mm - Some Toyota models, particularly older ones or high-performance variants, may use 17mm lug nuts.
It's important to note that the lug nut size can vary depending on the specific Toyota model, year, and trim level. Always refer to your owner's manual or consult a Toyota dealer to determine the correct lug nut size for your vehicle.
Identifying Lug Nut Size
If you're unsure of the lug nut size on your Toyota, there are a few ways to identify it:
- Check the owner's manual - The owner's manual will typically list the correct lug nut size for your Toyota model.
- Measure the lug nuts - Use a lug nut socket or caliper to measure the diameter of the lug nuts on your vehicle.
- Consult a Toyota dealer - Your local Toyota dealer can help you determine the correct lug nut size for your specific vehicle.
Knowing the correct lug nut size is essential for ensuring the proper installation and maintenance of your Toyota's wheels. By following the guidelines outlined in this article, you can ensure that your Toyota's lug nuts are properly tightened and your wheels are securely in place.
Is 22 mm the same as 7 8 of an inch?
22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch. 25mm = almost 1 inch.
What size socket takes off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 13 16 close to 22mm?
21mm = just over 13/16 inch. 22mm = almost 7/8 inch. 23mm = 29/32 inch. 24mm = just over 15/16 inch.
Is 13/16 the same as 21mm?
You can use a 21mm socket on a 13/16 nut. But not vice versa. And the fitment might not be great (Depends on manufacturing tolerances). 13/16 of an inch is 20.65mm.
Can I use 7/8 instead of 22mm?
A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
What standard size is closest to 22mm?
Wrench Size Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/2" | 19mm | 3/4" |
| 9/16" | 21mm | 13/16" |
| 22mm | 7/8" | |
| 5/8" | 24mm | 15/16" |
Why do Toyota lug nuts swell?
Toyota lug nuts are crome plated steel clad with a steel core; moisture will work itself between the cladding and the core and rust. As the rust builds up between the two layers the lug nut will swell. This happened to me and I had to replaced them with aftermarket ones.
Is 19mm the same as 3/4?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
What happens if you don't replace swollen lug nuts?
A swollen lug nut won't cause issues with driving, but it's highly recommended that you replace them as soon as possible. To remove swollen lug nuts by yourself, you'll need to either use a hammer to seat the socket over the lug nut. This works when the swelling isn't too bad.
What size are Toyota lug nuts?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
