What size rims fit a 2014 Ford Fusion?
The 2014 Ford Fusion accepts rims ranging from 16 to 18 inches in diameter, with a common 5x108 mm bolt pattern and roughly ET40–ET50 offset. Always verify exact specs for your VIN before buying aftermarket wheels.
Rim sizes by trim and configuration
Below is a guide to the typical wheel diameter associated with common trims and configurations. Sizes can vary by market and optional packages, so use this as a baseline and confirm against the vehicle’s build sheet or dealer data for your exact car.
Trim-specific notes
- 16-inch rims: Common on base S models with steel wheels and P215/60R16 tires. Suitable for winter setups and budget-minded shoppers.
- 17-inch rims: Found on many SE and SEL configurations with alloy wheels; typical tire sizes include P215/55R17 or P225/50R17 depending on the equipment package.
- 18-inch rims: Standard on Titanium models and some SE/SEL Sport packages; typical tires include P235/45R18 or similar, offering a more performance-oriented look and feel.
With any upgrade, ensure the rim diameter stays within the vehicle’s acceptable range and that the chosen wheel clears the brakes and fenders at full lock and during suspension travel.
Key specs to verify before buying
Beyond diameter, there are several specifications that determine whether a wheel will fit safely and correctly on a 2014 Fusion. Check these details carefully before purchasing aftermarket rims.
Baseline compatibility considerations
- Bolt pattern: 5 lug on a 108 mm circle (5x108).
- Center bore: typically about 63.4 mm, important for hub-centric fitment or the need for rings.
- Offset: generally in the +40 to +50 mm range for Fusion wheels; deviations can affect alignment and clearance.
- Width and tire compatibility: choose a width that accommodates your intended tire size without rubbing or scraping at full lock or during suspension movement.
Always confirm VIN-specific data or consult a wheel-fit calculator or a professional to ensure exact clearance and fit for your car configuration.
How to determine the right fit for your Fusion
To avoid fitment problems and safety issues, follow a structured approach when selecting wheels for your Fusion.
Practical steps for verification
- Refer to the owner's manual, Ford’s official parts lookup, or the dealer for VIN-specific wheel data.
- Use a reputable wheel-fit calculator or consult a trusted retailer to verify offset, bolt pattern, and center bore compatibility.
- Consider hub-centric rings or spacers only if recommended by the wheel manufacturer or dealer.
- Have a professional preview-fit the wheels to assess brake caliper clearance, suspension travel, and fender clearance before driving on aftermarket wheels.
Taking these steps helps ensure a safe, reliable upgrade that preserves handling and avoids contact with bodywork or suspension components.
Summary
The 2014 Ford Fusion supports rims from 16 to 18 inches in diameter, using a 5x108 mm bolt pattern and a center bore near 63.4 mm. Typical offsets hover around ET40–ET50, with trim-specific variations in wheel width and design. Always verify VIN-specific data and fitment with a wheel specialist or retailer to ensure a proper, safe upgrade.
