What size socket fits a Toyota axle nut?
The most common size socket for a Toyota axle nut is a 36mm socket. This size is typically used for the axle nuts on many Toyota vehicles, including popular models like the Camry, Corolla, and RAV4.
Determining the Correct Axle Nut Size
The size of the socket needed for a Toyota axle nut can vary depending on the specific model and year of the vehicle. However, the 36mm size is the most widely used across the Toyota lineup. To confirm the correct size for your Toyota, you can check the owner's manual or consult a repair guide for your particular model.
It's important to use the right size socket when removing or tightening the axle nut, as using the wrong size can damage the nut or the axle itself. Overtightening the nut can also cause issues, so it's crucial to follow the manufacturer's recommended torque specifications.
Tips for Removing Toyota Axle Nuts
- Use a high-quality 36mm socket, preferably a deep well socket for better access.
- Apply penetrating oil or lubricant to the nut if it's stuck or difficult to remove.
- Use a breaker bar or impact wrench to loosen the nut, as they can be very tight.
- Be careful not to damage the axle shaft or surrounding components when removing the nut.
- Consult a repair manual for the proper torque specifications when reinstalling the nut.
Following these tips and using the correct 36mm socket size will help ensure a safe and successful axle nut removal and reinstallation on your Toyota vehicle.
What size is the axle nut on a 2012 Toyota Corolla?
The rotors do not need the axle nut removed to be removed but the axle nut is a special 12 point 30mm socket and an unstaking tool.
What size is the spindle nut on a Toyota pickup?
3/4 IN.
What size is the CV axle nut on a 2011 Toyota Sienna?
Axle Nut Length (in): 1 1/3. Axle Nut Length (mm): 34.6. Axle Nut Locking Type: Stake. Axle Nut Thread Size: M22*1.5.
What size is the axle nut on a Toyota Camry?
Notes: Axle Nut -- M22 x 1.5, 12-Point Hex Star Pattern Nut. 2002-2018 Toyota Camry.
What size are the nuts on a Toyota Camry?
So a 21mm is what is desired.
What size is the axle nut?
36mm Axle Nut Socket - services many GM, Ford and Chrysler full-size vehicles. 32mm Axle Nut Socket - services late model Honda and Chrysler vehicles. 34mm Axle Nut Socket - services many GM mid-size vehicles. 29mm Axle Nut Socket - services late model GM, Ford and Asian imports.
Is 13/16 the same as 21 mm?
21 mm is . 826", 13/16 is . 812" . If you are getting a 13/16 socket on those, it's a pretty sloppy socket.
What size socket to remove axle nut?
There is several different sizes that the axle nut could be most axle nut sets will have sockets from 28mm-38mm. The more common ones are 32-36. You may see if the new axle you are installing has a new nut which is recommended when replacing and use that to match up if you just want to buy a single socket.
What size socket is a Toyota axle nut?
The axle nut is 30mm 12 point. You will need a Deep 30mm 12 point socket. Alternative deep sockets that will work are a deep 33mm 6 point and a deep 1 3/16" 12 point.
What size socket is a Toyota wheel nut?
What are Toyota Lug nuts sizes? The lug nuts on a Toyota vehicle are metric and 21mm in size. You can use a 13/16″ socket to fit them, but only if the tin cover is not damaged or bent. The thread size of the lug nuts on a Toyota Camry is M12 x 1.5, and the center hole size is 60.1 mm.
