What size socket for a Honda CRV oil plug?
Most Honda CR-V models use a 14mm socket to remove the oil drain plug; some variants may require a 17mm. Always verify by inspecting the plug head or consulting the owner's manual. This guide explains how to determine the correct size for your specific CR-V year and engine.
Common sizes and how to confirm
Begin with the most common size and check the plug head. If a 14mm socket doesn’t fit snugly or feels loose, try a 17mm. Use the correct size to avoid rounding off the plug.
- 14 mm socket: The most widespread size for many Honda CR-V drain plugs across multiple generations.
- 17 mm socket: A less common alternative for certain models or engine configurations; do not force a larger size onto a plug that isn’t designed for it.
Concluding: If neither size seats snugly, the plug may be a different type (Allen/Torx) or the head could be damaged. Consult the service manual or a mechanic to confirm the exact drive size for your vehicle.
How to identify the correct size for your specific CR-V
Use these steps to verify the socket size without risking damage to the plug or pan.
- Check the owner's manual or service guide for the recommended drain plug size for your model year and engine code.
- Inspect the drain plug head: look for a hex across flats; common sizes are 14 mm or 17 mm. If unsure, measure the flats with a caliper or try sockets starting from 14 mm up or down as appropriate.
- Test-fit cautiously: start with the 14 mm socket; if it doesn’t fit snugly, move to 17 mm. Do not apply force to force a socket onto a plug.
Final tip: If you're unsure, take a photo of the plug head and ask at a dealership or auto parts store to confirm the correct size for your specific CR-V model.
Summary
The typical drain plug socket size for Honda CR-V models is 14mm, with 17mm as a possible alternative for certain variants. Always verify by checking the plug head or the owner's manual before attempting removal.
What size is the oil drain plug on a 2015 Honda CRV?
The 2015 Honda CR-V oil drain plug has a M14-1.50 thread size and a 17mm head. You will also need a new drain plug washer, and the correct one has an M14 size.
- Thread Size: M14-1.50
- Head Size: 17mm (or 11/16")
- Washer: M14 drain plug washer is required.
What size is the drain plug on a Honda CRV 2025?
Oil drain plug M14-1.5.
What size socket do I need to remove the oil drain plug?
The correct socket size for an oil plug depends on your car's make and model, as there is no single universal size. Common metric sizes include 14mm, 15mm, 17mm, and 19mm, while some older vehicles may use SAE sizes like 3/8" or 1/2". Always inspect the plug to confirm the size, as using the wrong socket can damage the bolt head.
You can watch this video to learn how to change the oil in a Honda CR-V, including removing the drain plug: 1m1A Auto: Repair Tips & Secrets Only Mechanics KnowYouTube · Aug 13, 2018
How to find the right size
- Check your owner's manual: This is the most reliable way to find the correct size for your specific vehicle.
- Inspect the plug: Visually examine the drain plug to determine its size. You can also measure it with a caliper if needed.
- Try common sizes: If you can't find your manual, start with common metric sizes like 14mm, 15mm, 17mm, or 19mm.
- Use the right socket type: A 6-point socket is recommended over a 12-point socket to prevent stripping the bolt head.
This video demonstrates how to use a drain plug removal tool with a magnetic feature: 52sScavenger1320YouTube · Feb 23, 2024
Important tips
- Use the correct socket: A well-fitting socket is crucial to avoid rounding the bolt head.
- Tighten properly: Do not overtighten the drain plug, as this can strip the threads. Tighten it to the manufacturer's specifications, or just snug it up if you don't have a torque wrench.
- Replace the crush washer: It is a good practice to replace the crush washer on the drain plug to ensure a proper seal.
What size socket for oil drain plug honda crv?
And be pretty similar to many other Hondas that are out there on the road. Today all right and then for the tools and the parts we're going to start with the Honda. OEM oil filter.
