What size socket for crosstrek lug nuts?
The standard lug nut size for a Subaru Crosstrek is 17mm. This size socket is required to properly remove and tighten the lug nuts on your Crosstrek's wheels.
Detailed Explanation
The Subaru Crosstrek is a popular compact crossover SUV that has been in production since 2012. Like most vehicles, the Crosstrek uses lug nuts to securely attach the wheels to the vehicle's hubs. These lug nuts need to be tightened to the proper torque specification to ensure the wheels remain safely in place.
The size of the lug nuts on a Crosstrek is 17mm. This means you will need a 17mm socket or wrench to remove and tighten the lug nuts when changing a tire or performing other wheel-related maintenance. Using the correct 17mm socket size is important to avoid stripping the lug nuts or damaging the wheel.
Tips for Changing Crosstrek Lug Nuts
- Always use a torque wrench to tighten lug nuts to the manufacturer's recommended torque specification, typically around 70-90 ft-lbs for the Crosstrek.
- Check the lug nut torque periodically, especially after the first 50-100 miles of driving, to ensure they remain properly tightened.
- If you notice any signs of wear or damage on the lug nuts, replace them immediately.
- Keep a 17mm socket, lug wrench, and torque wrench in your Crosstrek's emergency kit for easy tire changes.
Properly maintaining the lug nuts on your Subaru Crosstrek is essential for safe driving. Always use the correct 17mm socket size and follow the manufacturer's torque recommendations when removing or tightening the lug nuts.
What size socket for Subaru Crosstrek lug nuts?
To remove the lug nuts on your 2024 Crosstrek, you'll need a 19mm 6-point socket, also known as a 19mm hex socket.
What is the most common lug nut socket size?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
Are Subaru lug nuts metric or standard?
Yes, almost all Subaru cars use metric bolts. The thread sizes of the lug nuts will vary based on the wheel studs. Therefore, you need metric Subaru lug nuts to fully secure the wheels. For example, the most common metric thread sizes of Subaru bolts are M12x1.
What size socket is a 2019 Subaru Forester lug nut?
The socket size you need to remove or install your Subaru Forester lug nuts depends on the size of the lug nuts themselves. The socket size is usually slightly larger than the diameter of the lug nut, such as 19 mm for an M14 lug nut. For 1996-2022 models with 15″-21″ wheels, the lug nut socket size is 19 mm.
What size are Subaru lug nuts?
25 Wheel Nuts Set 20 Pcs Lug Nuts Hex Size 3/4"(19mm) Replacement for Subaru Ascent 2019-2020,for Subaru BRZ 2013-2020,for Subaru Crosstrek 2016-2020,for Subaru Forester 2003-2020.
What size socket do I need to take off lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are the wheel nuts on a 2024 crosstrek?
Dorman – Wheel Nut M12-1.25 Acorn – 19mm Hex, 24mm Length (Part No. 611-076)
What socket size are Subaru lug nuts?
What Size Socket are Subaru Lug Nuts? To remove and install Subaru lug nuts, you'll need a 19mm socket. This fits the standard 12mm x 1.25 nuts.
What size are the lug nuts on a 2019 Subaru Crosstrek?
M12x1. 25 Open End Bulge Acorn Lug Nut - 19mm Hex - 60 Degree Cone Seat. Crafted with precision machined threads to ensure a perfect fit and cold forged steel for extra strength.
