What size socket for Honda lug nuts?
The standard socket size for Honda lug nuts is 19mm. This size is commonly used across Honda's vehicle lineup, including popular models like the Civic, Accord, and CR-V.
Determining the Correct Lug Nut Socket Size
Knowing the right socket size for your Honda's lug nuts is important for properly removing and replacing wheels. The lug nut size can vary depending on the specific Honda model and year, so it's best to consult your owner's manual or check the lug nuts themselves to confirm the correct size.
Some key points about Honda lug nut sizes:
- The most common size is 19mm, but some older Honda models may use 17mm or 21mm lug nuts.
- Newer Honda vehicles, including the latest Civic and Accord models, typically use 19mm lug nuts.
- SUVs and trucks in the Honda lineup, such as the Pilot and Ridgeline, also generally have 19mm lug nuts.
- It's important to use the right socket size to avoid rounding or damaging the lug nuts.
Knowing the correct lug nut socket size for your Honda will ensure you can safely and properly remove and replace your vehicle's wheels.
What size socket is a Honda lug nut?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| Accord | 2003-2020 | 19 mm |
| Civic | 2006-2020 | 19 mm |
| CR-V | 1997-2020 | 19 mm |
| Pilot | 2003-2020 | 21 mm |
What size are the lug nuts on a Honda?
Most modern Honda vehicles use an M12 x 1.5 lug nut size. This means the lug nut has a 12mm diameter and a 1.5mm thread pitch. You should always confirm the specific size for your vehicle, as there can be exceptions like some Civic Type R models.
Standard Honda lug nut size
- Thread size: M12 x 1.5
- Diameter: 12mm
- Thread pitch: 1.5mm
What this means for you
- This size is common for many Honda models, including the Civic, Accord, CR-V, and HR-V, and has been for decades.
- The hex size (the size of the socket needed to turn the nut) is typically 19mm (or 3/4") for standard M12x1.5 lug nuts.
- If you are unsure, always check your owner's manual or a reliable source for your exact year and model.
Is a 13/16 socket the same as 21mm?
No, a 13/16 inch socket is not exactly the same as a 21mm socket, but they are very close and often considered interchangeable, as 13/16 inch is approximately $20.65$mm. Because of the small difference, one size may fit a nut or bolt more snugly than the other depending on manufacturing tolerances. The 13/16" socket often provides a tighter fit on many $21$mm lug nuts.
- 13/16" conversion: 13/1613 / 1613/16 inch is equal to approximately 20.6520.6520.65 mm.
- 21mm conversion: 212121 mm is equal to approximately 13/1613 / 1613/16 inch, or 0.8270.8270.827 inches.
- Practical application: While they are theoretically different, many tools and parts manufacturers list them as equivalent, making them effectively interchangeable in practice.
- Best fit: If you have both a 13/16" and a 21mm socket, it is best to try both to see which one fits the fastener most securely without being too loose or too tight. A tighter fit is generally preferred to avoid rounding the fastener head.
What size socket is a 2004 Honda Accord lug nut?
12 mm x 1.50 thread size, 3/4" hex.
