What size socket is a 2010 Honda Odyssey lug nut?
The lug nuts on a 2010 Honda Odyssey typically require a 19 mm (3/4 inch) socket. This is the standard size for the factory lug nuts on these wheels. The following sections explain the size in more detail and how to verify it for your specific setup.
In this article, we break down the common lug nut size for the 2010 Odyssey, explain how to confirm whether you’re dealing with OEM hardware or aftermarket wheels, and provide safe steps for removing and reinstalling lug nuts.
Identifying the correct lug nut size
The 19 mm (3/4 inch) hex socket is the standard size you’ll use to loosen and tighten the lug nuts on most 2010 Odyssey wheels with factory hardware. If your vehicle has aftermarket wheels or lug nuts, sizes can vary, so it’s important to verify against the wheel manufacturer’s specifications or the service manual for your exact setup.
- Standard socket size for factory lug nuts: 19 mm (3/4 inch) hex. This size fits the majority of OEM wheels used on the 2010 Honda Odyssey.
- Aftermarket wheels or different lug nut designs can require a different size (for example, 21 mm or other configurations). Always confirm with the wheel manufacturer or your dealer if you’re not sure.
- Use the correct type of socket or lug wrench to avoid rounding the nuts; 19 mm is common, but compatibility depends on the nut’s shape and seating.
In summary, for most 2010 Odyssey owners with original wheels, a 19 mm socket will be the right tool. If you’re using aftermarket wheels, double-check the specification to avoid damage.
Safe removal and installation of lug nuts
Follow these steps to safely remove and reinstall lug nuts, ensuring wheel security and proper torque.
- Park on a level surface and engage the parking brake. Place wheel chocks around the wheels that will stay on the ground.
- Before lifting the vehicle, loosen the lug nuts slightly with the vehicle still on the ground using a 19 mm socket. Do not remove them yet.
- Raise the vehicle with a suitable jack at the correct jacking point and support it securely with stands if you’re working under the vehicle.
- Remove the lug nuts and take off the wheel. Inspect the lug studs and nuts for damage or corrosion; replace if necessary.
- Install the wheel, hand-tighten the lug nuts in a star pattern to seat evenly.
- Lower the vehicle and finish tightening the lug nuts to the manufacturer’s torque specification using a calibrated torque wrench. For many Honda models, this is commonly in the vicinity of 80–90 ft-lbs, but always verify the exact spec for your year and wheel type in the owner’s manual or service guide.
- After installation, recheck torque after driving a short distance (often 50–100 miles) to ensure the nuts remain properly torqued as the wheels settle.
These steps help ensure a safe, properly torqued installation. Use the exact torque value specified for your vehicle as listed in the owner’s manual, since wheel and tire configurations can vary.
Additional considerations
Not all wheels are identical. If you’re switching to aftermarket wheels or using different lug nuts, verify seat type (conical, ball, or flat), thread size, and torque requirements with the wheel manufacturer or a qualified technician to prevent damage or unsafe conditions.
Why lug nut size matters
The correct socket size helps prevent rounding and ensures the lug nuts are tightened evenly and securely. Using the wrong size can damage the lug nuts, the wheel studs, or the wheel itself, creating a safety risk while driving.
Summary
For a 2010 Honda Odyssey, the standard lug-nut socket size is 19 mm (3/4 inch) for OEM wheels. If you have aftermarket wheels, always confirm the exact size and torque requirements with the wheel manufacturer or your dealer. Following proper safety steps and using the correct tools will help ensure a secure, properly torqued lug-nut installation.
What size are the lug nuts on a 2010 Honda Odyssey?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Conical 60, Duplex Acorn, 1.87" Length, Chrome (sold by each) (Part No. 611-187)
What size are the lug nuts on a Honda Odyssey?
Thread Diameter: M14. Thread Size: M14-1.50. Overall Length (in): 1.122 in.
What size are the lug nuts on a 2010 Honda?
Notes: Nut. 12 mm x 1.50 thread size, 3/4" and 13/16" hex. 4-pack, acorn lock, socket key.
Is 7/8 socket the same as 22mm?
A: 22mm = 0.866", which essentialy is a 7/8" socket. A 7/8" socket will work on a 22mm lug nut, but it can feel a little loose. The other way around, a 22mm can work on a 7/8" lug nut, but it can be really snug, which is not bad.
