What size socket is a 2013 Acura TSX lug nut?
The lug nut size for a 2013 Acura TSX is 12mm. This is the standard size used on the Acura TSX and many other vehicles of similar size and weight. Knowing the correct lug nut size is important when changing a tire or performing other maintenance on your vehicle.
Detailed Information on 2013 Acura TSX Lug Nut Size
The 2013 Acura TSX is a midsize luxury sedan that was part of the second generation of the TSX model line. It came equipped with 17-inch alloy wheels as standard, and the lug nuts used to secure these wheels have a diameter of 12 millimeters (mm).
This 12mm lug nut size is common across many Acura and Honda vehicles from this era, including the:
- 2009-2014 Acura TSX
- 2008-2012 Honda Accord
- 2013-2017 Acura ILX
- 2012-2015 Honda Civic
Knowing the correct lug nut size is important when changing a flat tire or performing other maintenance that requires removing the wheels. Using the wrong size lug nuts can damage the wheel studs or make it difficult to properly secure the wheel.
How to Identify Lug Nut Size
If you're unsure of the lug nut size for your 2013 Acura TSX, there are a few ways to determine the correct size:
- Check your owner's manual - The lug nut size should be listed in the maintenance or specifications section.
- Measure the lug nuts - Use a metric lug nut socket or wrench to measure the diameter of the lug nuts. A 12mm socket will fit snugly on 12mm lug nuts.
- Consult an auto parts store - The staff can help you identify the correct lug nut size for your vehicle.
Having the right lug nut size on hand makes it much easier to change a flat tire or perform other wheel-related maintenance on your 2013 Acura TSX. Knowing this detail can save you time and frustration during roadside repairs.
What size are the lug nuts on a Acura TSX?
M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)
What size socket for wheel nuts?
You should have steel wheel bolts so you cant really damage them, the soft sockets are intended for alloy wheel nuts as found on air cooled 911. Anyhow you would need a 19mm socket to remove them.
What size socket to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size are Acura TSX wheels?
What size are Acura TSX wheels? The Acura TSX typically comes with either 17-inch rims or 18-inch rims.
How do I know my lug nut size?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it. That's most common for nuts that have a chrome cap fitted over the lug nut, but it's a possibility.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are the wheel nuts on Acura TLX?
Wheel Nut M12-1.50 Acorn – 19mm Hex, 35mm Length. Wheel Lug Nut: M12-1.50 Thread, Radius, Acorn, 1.378″ Length, Chrome (Sold by each)
What lug pattern is 2013 TSX?
The Acura TSX typically comes with a 5x114. 3 bolt pattern, AKA the 5x4. 5 bolt pattern.
How much HP does a 2013 Acura TSX have?
The 2013 TSX boasts 201 horsepower. For a more detailed look at the 2013 TSX specs, features and options check out Kelley Blue Book's 2013 Acura TSX specs page.
What size are the lug nuts on an Acura?
Dorman – Wheel Lug Nut: M14-1.50 Thread, Flanged, Mag, 1.362" Length, Chrome (Sold by each) (Part No. 611-278)
