What size socket is a 2016 Dodge Charger lug nut?
A 21 mm socket is the standard size for all lug nuts on a 2016 Dodge Charger.
The Charger uses M14 x 1.5 lug studs with a 5x115 mm bolt pattern. The factory lug nuts are designed for a conical (60-degree) seat and should be torqued to the vehicle’s specifications. If you’re working with aftermarket wheels or spacers, verify the exact fastener requirements with the wheel manufacturer or a dealer to avoid fitment or safety issues.
Key lug-nut specifications for the 2016 Dodge Charger
The following details cover the standard factory setup for the Charger’s stock wheels. If you use aftermarket wheels, verify with the wheel manufacturer for compatibility.
- Hex size (socket): 21 mm
- Stud thread size: M14 x 1.5
- Bolt pattern: 5 x 115 mm
- Seat type: conical (60-degree) seat
These specs reflect the typical factory configuration for the 2016 Charger. Always verify with your vehicle’s documentation or a trusted mechanic, especially when changing wheels or tires.
Additional considerations
Always torque lug nuts in a star pattern to the manufacturer’s specification to ensure even seating and prevent warping or damage to the wheel. If you’re unsure about the exact torque, consult the owner’s manual or a dealer. After changing wheels, re-check torque after driving a short distance as the nuts can settle.
Summary
For a 2016 Dodge Charger, use a 21 mm socket to remove and install lug nuts. The stock setup uses M14 x 1.5 studs, a 5x115 mm bolt pattern, and conical-seat lug nuts. Verify compatibility with any aftermarket wheels and follow proper torque procedures to maintain wheel security.
What size are the lug nuts on a 2016 Dodge Charger?
Notes: Nut. 14 mm x 1.50 thread size, 7/8" hex, 1.78" length. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
Is 7/8 socket the same as 22mm?
No, a 7/8 socket is not exactly the same as a 22mm socket, but they are often used interchangeably because the difference is very small. A 7/8 inch socket is equal to 0.8750.8750.875 inches, while a 22mm socket is equal to approximately 0.8660.8660.866 inches, making the 7/8 socket slightly larger. Using a 7/8 socket on a 22mm fastener may feel a bit loose, and a 22mm socket on a 7/8 fastener may be a bit snug.
Size comparison
- 7/8 inch socket: 0.8750.8750.875 inches
- 22mm socket: 0.8660.8660.866 inches
Interchangeability and potential issues
- Using a 7/8" socket on a 22mm fastener: This may feel slightly loose because the socket is larger than the fastener.
- Using a 22mm socket on a 7/8" fastener: This may be a snug fit, which is generally better than a loose fit, but could be difficult to use.
- Recommendation: For the most precise fit, it's best to use the correct tool for the job. If you have a 22mm fastener, use a 22mm socket. If you have a 7/8 inch fastener, use a 7/8 inch socket.
When to be cautious
- Corroded or worn fasteners: If a fastener is corroded or the chrome cap has swelled, either socket may fit poorly.
- Torque: For high-torque applications, using the correct size socket is important to prevent damage to the tool or the fastener.
What size socket for Dodge Charger lug nuts?
The socket size for a Dodge Charger lug nut is typically 7/8 inch (22mm), although some older models or specific wheel types may use 13/16 inch (20.6mm). It's best to use a 7/8 inch socket to be sure, as a 22mm socket and a 7/8 inch socket are very close in size and 7/8 inch is the most common size for modern Chargers.
- Common size: 7/8 inch or 22mm.
- Alternative size: 13/16 inch may be found on some factory steel wheels with hub caps.
- For precision: To ensure the best fit, you can use a 7/8 inch socket, but be aware that a 22mm socket will be a little snug and may cause damage.
Is a 13/16 socket the same as 21mm?
No, a 13/16 inch socket is not exactly the same as a 21mm socket, but they are very close and often considered interchangeable, as 13/16 inch is approximately $20.65$mm. Because of the small difference, one size may fit a nut or bolt more snugly than the other depending on manufacturing tolerances. The 13/16" socket often provides a tighter fit on many $21$mm lug nuts.
- 13/16" conversion: 13/1613 / 1613/16 inch is equal to approximately 20.6520.6520.65 mm.
- 21mm conversion: 212121 mm is equal to approximately 13/1613 / 1613/16 inch, or 0.8270.8270.827 inches.
- Practical application: While they are theoretically different, many tools and parts manufacturers list them as equivalent, making them effectively interchangeable in practice.
- Best fit: If you have both a 13/16" and a 21mm socket, it is best to try both to see which one fits the fastener most securely without being too loose or too tight. A tighter fit is generally preferred to avoid rounding the fastener head.
