What size socket is a 2017 Ford Focus lug nut?
The lug nuts on a 2017 Ford Focus typically require a 21mm socket. This is the standard size for the lug nuts on this model year of the Ford Focus.
Detailed Explanation
The 2017 Ford Focus is a compact car that was produced by the Ford Motor Company. Like most vehicles, the Ford Focus uses lug nuts to secure the wheels to the vehicle's hubs. Lug nuts are the threaded fasteners that hold the wheel in place.
The size of the lug nut socket needed for a 2017 Ford Focus is 21mm. This is a common size for many modern vehicles, as it provides the necessary torque to properly tighten the lug nuts and keep the wheels securely attached.
- The 21mm socket size is the standard for the 2017 Ford Focus.
- Using the correct socket size is important to avoid stripping the lug nuts or damaging the wheel.
- Proper torque specifications should also be followed when tightening the lug nuts to ensure the wheels are safely secured.
It's always a good idea to consult your owner's manual or contact a Ford dealership or certified mechanic if you have any questions about the specific lug nut size or torque requirements for your 2017 Ford Focus.
What size socket for Ford Focus lug nuts?
The correct wheel nut socket size for a Ford Focus is 19mm. The lug nuts are also specified as having an M12x1.5 thread size. For best results, use a deep, 12-point, and quality-made socket to avoid damaging the nuts, especially if they are rounded.
- Socket size: 19mm
- Thread size: M12x1.5
- Recommendation: Use a quality 19mm socket that fully fits the nut to prevent rounding. Avoid adjustable or shallow sockets.
Is 13/16 the same as 21mm?
No, 13/1613 / 1613/16 inch is not the same as $21$mm, but they are very close and often used interchangeably.13/1613 / 1613/16 inch is equal to $20.65$mm, while $21$mm is equal to approximately 0.830.830.83 inches, meaning $21$mm is slightly larger. Because the sizes are so close, a $21$mm socket or wrench will often fit a 13/1613 / 1613/16 inch nut or bolt, and vice versa, though there can be a less-than-perfect fit depending on the manufacturing tolerances of the tools and fasteners.
- 13/1613 / 1613/16 inch = $20.65$mm
- $21$mm = 0.826770.826770.82677 inches, which is slightly larger than 13/1613 / 1613/16 inch
What size are the lug nuts on a 2017 Ford Focus?
The lug nut size for a 2017 Ford Focus is M12 x 1.5. You will need a 19mm socket to install or remove these lug nuts.
- Thread size: M12 x 1.5 (12mm diameter, 1.5mm thread pitch)
- Socket size: 19mm
- Torque specification: 81 lb-ft (110 Nm)
Is 7/8 socket the same as 22mm?
No, a 7/8 socket is not exactly the same as a 22mm socket, but they are often used interchangeably because the difference is very small. A 7/8 inch socket is equal to 0.8750.8750.875 inches, while a 22mm socket is equal to approximately 0.8660.8660.866 inches, making the 7/8 socket slightly larger. Using a 7/8 socket on a 22mm fastener may feel a bit loose, and a 22mm socket on a 7/8 fastener may be a bit snug.
Size comparison
- 7/8 inch socket: 0.8750.8750.875 inches
- 22mm socket: 0.8660.8660.866 inches
Interchangeability and potential issues
- Using a 7/8" socket on a 22mm fastener: This may feel slightly loose because the socket is larger than the fastener.
- Using a 22mm socket on a 7/8" fastener: This may be a snug fit, which is generally better than a loose fit, but could be difficult to use.
- Recommendation: For the most precise fit, it's best to use the correct tool for the job. If you have a 22mm fastener, use a 22mm socket. If you have a 7/8 inch fastener, use a 7/8 inch socket.
When to be cautious
- Corroded or worn fasteners: If a fastener is corroded or the chrome cap has swelled, either socket may fit poorly.
- Torque: For high-torque applications, using the correct size socket is important to prevent damage to the tool or the fastener.
