What size socket is a 2018 Ford EcoSport lug nut?
The lug nuts on most 2018 Ford EcoSport models typically require a 21mm hex socket (about 13/16 inch). Always verify the exact size on your wheels or in the owner's manual, especially if you have aftermarket wheels or a locking lug nut kit.
Socket size you’re likely to need
Understanding lug nut size helps ensure you use the correct tool and avoid damaging the nut or wheel. For the EcoSport, the standard hex size is commonly 21mm, but variations can occur with different wheel setups or security fasteners.
Below are the most common scenarios and how to handle them.
- 21mm hex (approximately 13/16 inch) is the standard size for EcoSport lug nuts.
- If your wheels have locking lug nuts, you’ll need the manufacturer’s key rather than a regular socket.
In practice, if a 21mm socket doesn’t fit snugly on all lug nuts, stop and check for locking nuts or a non-standard size on that wheel. When in doubt, refer to the owner’s manual or contact a Ford dealer for guidance.
How to verify the correct size on your vehicle
To confirm, inspect a lug nut on the wheel: measure the distance across the flats with a caliper or ruler, check any size markings on the nut, and compare with Ford’s service literature. If you’re replacing wheels or lug nuts, ensure the new hardware matches the original seat type and size to prevent damage.
Summary
For a 2018 Ford EcoSport, the typical lug nut size is a 21mm socket (about 13/16 inch). Always check your specific wheels and any locking nuts, and consult the owner's manual or a dealer if you’re unsure to ensure proper fit and torque.
