What size socket is a 2019 Honda Ridgeline lug nut?
When it comes to maintaining your vehicle, knowing the correct tools for the job is essential. One common task that many vehicle owners face is changing a tire, which requires the right socket size for lug nuts. If you own a 2019 Honda Ridgeline, you might be wondering what size socket you need for its lug nuts. In this article, we will provide you with the necessary information to ensure you are well-prepared for any tire-related tasks.
Socket Size for 2019 Honda Ridgeline Lug Nuts
The lug nuts on a 2019 Honda Ridgeline typically require a 19mm socket. This size is standard for many Honda vehicles, making it a common choice for both professional mechanics and DIY enthusiasts alike.
Why the Right Socket Size Matters
Using the correct socket size is crucial for several reasons:
- Prevents Damage: Using a socket that is too small can strip the lug nut, while one that is too large may not grip properly, leading to potential damage.
- Ensures Safety: Properly tightened lug nuts are essential for safe driving. An incorrect size can lead to loose lug nuts, increasing the risk of a tire coming off while driving.
- Saves Time: Having the right tools on hand allows you to complete tire changes quickly and efficiently, minimizing downtime.
Tips for Changing Tires on Your Honda Ridgeline
Here are some helpful tips to keep in mind when changing tires:
- Always Use a Jack Stand: After lifting the vehicle with a jack, place a jack stand underneath for added safety.
- Loosen Lug Nuts Before Jacking Up: It’s easier to loosen lug nuts while the tire is still on the ground.
- Follow a Star Pattern: When tightening lug nuts, follow a star pattern to ensure even pressure across the wheel.
By knowing the correct socket size and following these tips, you can confidently handle tire changes on your 2019 Honda Ridgeline. Remember, if you ever feel unsure about performing maintenance tasks, don’t hesitate to consult a professional mechanic.
Frequently Asked Questions
What is the torque for wheel nuts on a 2019 Honda Ridgeline?
Here's an updated guideline for Honda lug nut torque specs: Most Honda cars (e.g., Civic, Accord, Fit): 80 ft-lbs (108 Nm) Honda CR-V, HR-V: 80 ft-lbs (108 Nm) Honda Odyssey, Pilot, Passport, Ridgeline: 94 ft-lbs (127 Nm)
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What size socket for Honda lug nuts?
To properly remove and install Honda lug nuts, you'll need a socket that matches the nut size. The most common Honda wheel socket sizes are: 19mm – Fits 12×1.5 lug nuts. 22mm – Fits 14×1.5 lug nuts.
What size are the lug nuts on a 2019 Honda Ridgeline?
Notes: Nut. 14 mm x 1.50 thread size, 3/4" hex. Refer to your owner's manual or wheel manufacturer's guide for correct thread size, seat style, length, hex and torque specifications.
How do I know what size lug wrench I need?
Most manuals will specify the size and type of lug nuts required for the vehicle. But if you don't have access to your owner's manual, you can check the side of the wheel nut to see if the size is imprinted on it.
What socket size are wheel nuts?
The three most common hex sizes for lug nuts are 17 mm, 19 mm, and 21 mm, while 22 mm, 23 mm, 11⁄16 inch (17.5 mm), and 13⁄16 inch (20.6 mm) are less commonly used.
What size impact wrench for truck lug nuts?
Typically, passenger cars and light trucks have lug nuts that range from 17mm to 23mm. A 1/2-inch drive impact wrench is usually sufficient for these sizes. However, if you own a larger vehicle, such as a heavy-duty truck, you might need a 3/4-inch or 1-inch drive impact wrench to handle larger lug nuts.
What size socket is a 2019 Honda Fit lug nut?
What Size Honda Lug Nuts Do I Need?
| Model | Year | Thread/ Socket Size |
|---|---|---|
| Fit | 2007-2020 | 19 mm |
| Accord | 2003-2020 | 19 mm |
| Civic | 2006-2020 | 19 mm |
| CR-V | 1997-2020 | 19 mm |
What size lug nuts are on a Honda SUV?
The lug nuts on most Honda CR-V models from 1997-2025 are 12×1.5 mm with a torque spec of 80 ft-lbs.
Is 19mm the same as 3/4?
Yes. 3/4″ is . 750″ and 19mm is 0.74803 Inches. Only 2 thousands of an inch difference.
