What size socket is the lug nut on the Acura MDX?
The lug nut size for the Acura MDX is 12mm. This is the standard size used on the wheels of this popular SUV model.
Detailed Information on Acura MDX Lug Nuts
The Acura MDX is a midsize luxury SUV that has been in production since 2001. It is known for its spacious interior, advanced safety features, and smooth ride quality. When it comes to the wheels and tires, the Acura MDX uses 12mm lug nuts to secure the wheels to the vehicle.
The 12mm lug nut size is a common specification for many SUVs and crossover vehicles. This size provides the necessary strength and torque to keep the wheels firmly attached, even during high-speed driving or heavy loads. It is important to use the correct lug nut size to ensure the wheels are properly secured and to avoid any potential safety issues.
Changing the Lug Nuts on an Acura MDX
If you need to change a tire or perform any maintenance on the wheels of your Acura MDX, you will need the following tools:
- 12mm lug wrench or socket
- Torque wrench
- Wheel chocks (to prevent the vehicle from rolling)
When changing the lug nuts, it is important to follow the proper procedure and tighten the lug nuts to the recommended torque specification, which is typically around 80-100 ft-lbs for the Acura MDX. Failure to properly tighten the lug nuts can lead to the wheels becoming loose, which can be extremely dangerous. Always double-check the torque after changing a tire to ensure the lug nuts are secure.
What size are the lug nuts on a 2019 Acura MDX?
M14x1. 5 Spline/Tuner Locking Wheel Lug Nuts for Aftermarket Wheels.
What size socket is the MDX lug nut?
M14x1. 5 Open End Bulge Acorn Lug Nut - 19mm Hex - 60 Degree Cone Seat.
What torque wrench for lug nuts?
1/2 -Inch Torque Wrench
It is the best tool if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts. Basically, any tightening task for both transmission and suspension, including motorcycles, would require a 1/2 -inch torque wrench.
Is 19mm the same as 3/4?
A 19 mm socket is 0.002 inches (two thousandths of an inch) smaller than 3/4 inch.
What size are Acura MDX wheels?
Acura MDX Tire Size for 2017 Models: 245/60R18, 245/50R20. Acura MDX Tire Size for 2019 Advance Package Models: 265/45R20. Acura MDX Tire Size for 2022 and Later Models: 255/50R20, 255/55R19, 275/40R21 (Type S)
What size socket do I need to remove lug nuts?
If the question “what size of sockets for lug nuts should I use” comes to your mind; the most common socket sizes for lug nuts are 17 mm, 19 mm, 21 mm, and 22 mm, all available at Olsa Tools. The 11/16-inch, 3/4-inch, 13/16-inch, and 7/8-inch SAE socket sizes also are fairly common.
What is the torque on the 2014 Acura MDX lug nuts?
While the 2013 MDX require a 22 mm wrench, the 2014 model features 19 mm hex size wrench. Wheel nut torque has also changed. The 22 mm hex-size nuts require 94 ft. -lbs. , the 2014 model's 19 mm hex nuts require 80 ft.
What size are the wheel nuts on a Acura MDX?
The thread sizes of Acura MDX lug nuts are M14x1. 5mm and M12x1. 5mm. In general, the 2007-2024 MDX YD2/ YD3 Facelift/ YD4 uses the M14x1.
What size socket do I need to remove a wheel lock?
12 pt socket
If you can't find a replacement key, find a 12 pt socket that just barely slips over. Take one size smaller and pound it on with a substantial hammer.
What is the torque on MDX lug nuts?
95 ft-lbs
